Description
Parameter
Select
Normal
or
Based on SRV Port
. The phone
creates an internal list of proxies returned in the DNS
SRV records.
If you select Normal, the list contains proxies ranked
by weight and priority.
If you select Based on SRV Port, the phone uses
normal, then inspects the port number based on the
first-listed proxy port.
Default: Normal
Proxy Redundancy Method
Set to
Yes
to enable the Dual registration/Fast Fall
back feature. To enable the feature you must also
configure the alternate proxy/alternate outbound proxy
fields in the Proxy and Registration section.
Dual Registration
If set to No, the fallback happens immediately and
automatically. If the Proxy Fallback Intvl is exceeded,
all the new SIP messages go to the primary proxy.
If set to Yes, the fallback happens only when current
registration expires, which means only a REGISTER
message can trigger fallback.
For example, when the value for Register Expires is
3600 seconds and Proxy Fallback Intvl is 600 seconds,
the fallback is triggered 3600 seconds later and not
600 seconds later. When the value for Register Expires
is 600 seconds and Proxy Fallback Intvl is 1000
seconds, the fallback is triggered at 1200 seconds.
After successfully registering back to primary server,
all the SIP messages go to primary server.
Auto Register When Failover
Subscriber Information
Description
Parameter
Name displayed as the caller ID.
Display Name
Extension number for this line.
When you need to refer to this user ID in another
setting, for example, the short name for a line key,
use the
$USER
macro variable.
User ID
Password for this line.
Default: Blank (no password required)
Password
Authentication ID for SIP authentication.
Default: Blank
Auth ID
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
288
Cisco IP Phone Troubleshooting
Subscriber Information
