General Purpose Parameters
Description
Parameter
The general purpose parameters GPP_* are used as
free string, registers when configuring the Cisco IP
phones to interact with a particular provisioning server
solution. They can be configured to contain diverse
values, including the following:
• Encryption keys
• URLs
• Multistage provisioning status information
• Post request templates
• Parameter name alias maps
• Partial string values, eventually combined into
complete parameter values
Default: Blank
GPP A - GPP P
Regional
Call Progress Tones
Description
Parameter
Prompts the user to enter a phone number.
Dial Tone
Alternative to the Dial Tone. It prompts the user to
enter an external phone number, as opposed to an
internal extension. It is triggered by a, (comma)
character encountered in the dial plan.
Outside Dial Tone
Prompts the user to enter a call forwarding phone
number.
Prompt Tone
Played when a 486 RSC is received for an outbound
call.
Busy Tone
Played when an outbound call has failed or after the
far end hangs up during an established call. Reorder
Tone is played automatically when <Dial Tone> or
any of its alternatives times out.
Reorder Tone
Played when the phone receiver has been off hook
after a period of time.
Off Hook Warning Tone
Played during an outbound call when the far end is
ringing.
Ring Back Tone
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
255
Cisco IP Phone Troubleshooting
General Purpose Parameters