In these parameter specifications,
n
denotes a serial number. This number determines the
sequential order in which the language options are displayed in the
Settings
menu of the phone.
0 is reserved for US-English, which has a default dictionary. You can use it optionally, to
specify your own dictionary.
Use numbers starting with 1 for other languages.
Note
• Specify the language name with the
d
n
parameter.
For example:
d1=Chinese-Simplified
This name is displayed as a language option in the
Settings
menu of the phone.
• Specify the name of the dictionary file with the
x
n
parameter.
For example:
x1=zh-CN_78xx_68xx-11.2.1.1004.xml
Make sure to specify the correct file for the language and phone model that you use.
• If a font is required for the language, specify the name of the font file with the
f
n
parameter.
For example:
f1=zh-CN_78xx_68xx-11.2.1.1004.ttf
Make sure to specify the correct file for the language and phone model that you use.
Font files with 'BMP' in the file name are for the Cisco IP Phone 7821.
Note
See
Setup for Latin Languages, on page 74
for specific details on setting up Latin languages.
See
Setup for an Asian Language, on page 74
for specific details on setting up an Asian language.
Step 3
Click
Submit All Changes
.
Setup for Latin Languages
If you use Latin languages such as French or German, you can configure up to 9 language options for the
phone. The options are displayed in the
Settings
menu of the phone. To enable the options, set up a dictionary
for each language that you want to include. To do this, specify a pair of the
d
n
and
x
n
parameters and values
in the
Dictionary Server Script
field, for each language that you want to include.
Example for including French and German:
serv=http://10.74.128.101/Locales/;d1=French;x1=fr-FR_78xx_68xx-11.2.1.1004.xml;
d2=German;x2=de-DE_78xx_68xx-11.2.1.1004.xml
Setup for an Asian Language
If you use an Asian language such as Chinese, Japanese, or Korean, you can only set up one language option
for the phone.
You must set up the dictionary and the font for the language. To do this, specify the
d1
,
x1
and
f1
parameters
and values in the
Dictionary Server Script
field.
Example for setting up Chinese-Simplified:
serv=http://10.74.128.101/Locales/;d1=Chinese-Simplified;
x1=zh-CN_78xx_68xx-11.2.1.1004.xml;f1=zh-CN_78xx_68xx-11.2.1.1004.ttf
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
74
Cisco IP Phone Installation
Setup for Latin Languages
