Cisco 7970G - IP Phone VoIP Administration Manual Download

Page: 156 / 301

Chapter 5 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Phone

5-10

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1

OL-14626-01

Directed Call Park

Allows a user to transfer an active call to
an available directed call park number
that the user dials or speed dials.

A Call Park BLF button indicates whether
a directed call park number is occupied
and provides speed-dial access to the
directed call park number.

Note

If you implement Directed Call
Park, avoid configuring the Park
softkey. This prevents users from
confusing the two Call Park
features.

For more information refer to

Cisco

Unified Communications Manager
Features and Services Guide, “

Call

Park and Directed Call Park”
chapter.

Direct transfer

(SCCP phones
only)

Allows users to connect two calls to each
other (without remaining on the line).

For more information, refer to

Cisco

Unified Communications Manager
System Guide

, “Cisco Unified IP

Phones” chapter.

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

Feature

Description Configuration

Reference

Summary of Contents for 7970G - IP Phone VoIP














































































































































































































































































































Search results

Summary of Contents for 7970G - IP Phone VoIP

Reviews:

Related manuals for 7970G - IP Phone VoIP

Brands by name

Popular brands

Cisco 7970G - IP Phone VoIP, Administration Manual

Search results

Summary of Contents for 7970G - IP Phone VoIP

Reviews:

Related manuals for 7970G - IP Phone VoIP

Brands by name

Popular brands