6-11
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Chapter 6 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Touchscreen
Automatically Disabling the Cisco Unified IP Phone
Touchscreen
To conserve power and ensure the longevity of the LCD screen on the phone, you
can set the LCD to turn off when it is not needed.
You can configure settings in Cisco Unified Communications Manager
Administration to turn off the display at a designated time on some days and all
day on other days. For example, you may choose to turn off the display after
business hours on weekdays and all day on Saturdays and Sundays.
When the display is off, the LCD screen is dark and disabled, and the
Display
button lights. You can take any of these actions to turn on the display any time it
is off:
•
Press any button on the phone.
If you press a button other than the
Display
button, the phone will take the
action designated by that button in addition to turning on the display.
•
Touch the touchscreen.
•
Lift the handset.
When you turn the display on, it remains on until the phone has remained idle for
a designated length of time, then it turns off automatically.
Note
You can use the
Display
button to temporarily disable the touchscreen for
cleaning. See the
“Cleaning the Cisco Unified IP Phone” section on page 9-26
for
more information.
Table 6-1
explains the Cisco Unified Communications Manager Administration
fields that control when the display turns on and off. You configure these fields
in Cisco Unified Communications Manager Administration in the Product
Specific configuration window. (You access this page by choosing
Device >
Phone
from Cisco Unified Communications Manager Administration.)
You can view the display settings for a phone from the Power Save Configuration
menu on the phone. For more information, see the
“Power Save Configuration
Menu” section on page 4-36
.
Summary of Contents for 7970G - IP Phone VoIP
Page 4: ......