Cisco 7970G - IP Phone VoIP Administration Manual Download

Page: 204 / 301

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

7-14

Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1

OL-14626-01

Network Statistics Screen

The Network Statistics screen displays information about the phone and network
performance.

Table 7-3

describes the information that displays in this screen.

To display the Network Statistics screen, follow these steps:

Procedure

Step 1

Press the

Settings

button.

Step 2

Select

Status.

Step 3

Select

Network Statistics.

To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the

Clear

softkey.

To exit the Network Statistics screen, press the

Exit

softkey.

Timed Out

Supplicant attempted 802.1X
transaction but timed out due the
absence of an authenticator.

Authentication typically times out if
802.1X authentication is not
configured on the switch.

Version error

The name of the phone load file is
incorrect.

Make sure that the phone load file has
the correct name.

XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name

Name of the configuration file.

None. This is an informational
message indicating the name of the
configuration file for the phone.

Table 7-2

Status Messages on the Cisco Unified IP Phone 7970 Series (continued)

Message

Description

Possible Explanation and Action

Summary of Contents for 7970G - IP Phone VoIP














































































































































































































































































































Search results

Summary of Contents for 7970G - IP Phone VoIP

Reviews:

Related manuals for 7970G - IP Phone VoIP

Brands by name

Popular brands

Cisco 7970G - IP Phone VoIP, Administration Manual

Search results

Summary of Contents for 7970G - IP Phone VoIP

Reviews:

Related manuals for 7970G - IP Phone VoIP

Brands by name

Popular brands