Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
3-8
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
OL-14626-01
Procedure
Notes
Reference
1.
Connect the handset to the
Handset port.
—
—
2.
Connect a headset to the
Headset port.
Optional. You can add a headset
later if you do not connect one
now.
See the
“Headset” section on
page 3-5
for supported headsets.
3.
Connect the power supply to
the Cisco DC Adapter port.
Optional.
See the
“Providing Power to the
Phone” section on page 2-4
.
4.
Connect a Category 3 or 5
straight-through Ethernet
cable from the switch to the
10/100 SW port (Cisco
Unified IP Phone 7970) or
the 10/100/1000 SW port
(Cisco Unified IP Phone
7971G-GE).
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
See the
“Network and Access
Ports” section on page 3-3
for
guidelines.
5.
Connect a Category 3 or 5
straight-through Ethernet
cable from another network
device, such as a desktop
computer, to the 10/100 PC
port (Cisco Unified
IP Phone 7970) or the
10/100/1000 PC port (Cisco
Unified IP Phone
7971G-GE).
Optional. You can connect
another network device later if
you do not connect one now.
See the
“Network and Access
Ports” section on page 3-3
for
guidelines.
Summary of Contents for 7970G - IP Phone VoIP
Page 4: ......