•
To enable wireless LAN for a group of phones, select the enable setting for the Wi-Fi parameter in a
Common Phone Profile Configuration window (
Device
>
Device Settings
>
Common Phone Profile
),
check the Override Common Settings check box, then associate the phone (
Device
>
Phone
) with that
common phone profile.
•
To enable wireless LAN for all WLAN-capable phones in your network, select the enable setting for
the Wi-Fi parameter in the Enterprise Phone Configuration window (
System
>
Enterprise Phone
Configuration
), and check the Override Common Settings check box.
In the Phone Configuration window in Cisco Unified Communications Manager Administration (
Device
>
Phone
), use the wired-line MAC address when you configure the MAC address. Cisco Unified
Communications Manager registration does not use the wireless MAC address.
Note
Wireless LAN on Cisco Unified IP Phone setup
Before the phone can connect to the WLAN, you must configure the network profile for the phone with the
appropriate WLAN settings. You can use the Network Setup menu on the phone to access the Wireless Setup
submenu and set up the WLAN configuration.
Related Topics
Wireless Setup menu, on page 108
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
100
VoIP Wireless Network
Wireless LAN on Cisco Unified IP Phone setup
REVIEW DRAFT - CISCO CONFIDENTIAL
