Forced Authorization Codes Setup
To force users to enter a Forced Authorization Code (FAC) when placing a call, configure the fields in the
Forced Authorization Code Configuration window (
Call Routing
>
Forced Authorization Code
). The
following table describes the Forced Authorization Code fields.
Table 30: FAC Field
Description
Field
Select the check box to require a user to enter an FAC.
Require Forced
Authorization Code
The code that the user must enter to be authorized to place the call.
Authorization Level
For more information, see the
“
Route pattern setup
”
chapter of the
Cisco Unified Communications Manager
Administration Guide
.
Incoming Call Toast Timer Setup
You can set the time that the Incoming Call Toast (incoming call notification window) displays on the user
phone. You set up the feature from one of the following Cisco Unified Communications Manager windows:
•
Enterprise Phone Configuration (
System
>
Enterprise Phone
)
•
Common Phone Profile Configuration (
Device
>
Device Settings
>
Common Phone Profile
)
•
Phone Configuration (
Device
>
Phone
)
The following table describes the Incoming Call Toast Timer.
Table 31: Incoming Call Toast Timer Field
Description
Field
Gives the time, in seconds, that the toast displays. The time includes the fade-in
and fade-out times for the window.
The possible values are 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, and 60.
The default is 5.
Incoming Call Toast
Timer
Set Up Peer Firmware Sharing
When enabled, the feature allows the phone to discover like phones on the subnet that are requesting the files
that make the firmware image, and to automatically assemble transfer hierarchies on a per-file basis. The
individual files making up the firmware image are retrieved from the TFTP server by only the root phone in
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
187
Features, Templates, Services, and User Setup
Forced Authorization Codes Setup
REVIEW DRAFT - CISCO CONFIDENTIAL
