Procedure
Step 1
Press
Applications
.
Step 2
Select
Administrator Settings
.
Step 3
Select
Status
.
Step 4
Select
Current Access Point
.
Step 5
To exit the Current Access Point screen, press
Exit
.
Current Access Point
The following table describes the fields in the Current Access Point screen.
Table 50: Current Access Point items on the Cisco Unified IP Phone 9971
Description
Item
Name of the AP, if it is CCX-compliant; otherwise, the MAC address displays here.
AP Name
MAC address of the AP.
MAC Address
The latest frequency where this AP was observed.
Frequency
The latest RSSI in which this AP was observed.
Last RSSI
Number of time units between beacons. A time unit is 1.024 ms.
Beacon Interval
This field contains a number of subfields that are used to indicate requested or
advertised optional capabilities.
Capability
Data rates that the AP requires and the AP at which the station must be capable of
operating.
Basic Rates
Data rates that the AP supports and the AP that are optional for the station to operate
at.
Optional Rates
The latest channel where this AP was observed.
Current Channel
Every nth beacon is a dtime period. After each DTIM beacon, the AP sends any
broadcast or multicast packets that are queued for power-save devices.
dtime Period
A two-digit country code. Country information might not be display if the country
information element (IE) is not present in the beacon.
Country Code
A list of supported channels (from the country IE).
Channels
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
245
Model information, status, and statistics
Display Current Access Point Screen
REVIEW DRAFT - CISCO CONFIDENTIAL
