•
HTTP or HTTPS protocols
If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols, use
http://
<IP_address>
or
https://
<IP_address> for phone web access.
If your Cisco Unified IP Phone is configured to use only HTTPS protocol, use
https://
<IP_address> for phone
web access.
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Some of the items in the following table do not apply to all phone models.
Note
To display the Device Information area, access the web page for the phone as described in
for Phone, on page 248
, and then click the
Device Information
hyperlink.
Table 51: Device Information Area Items
Description
Item
Media Access Control (MAC) address of the phone.
MAC Address
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Host Name
Directory number that is assigned to the phone.
Phone DN
Identifier of the firmware that is running on the phone.
Version
Identifier for the first KEM, if applicable.
Key Expansion Module 1
Identifier for the second KEM, if applicable.
Key Expansion Module 2
Identifier for the third KEM, if applicable.
Key Expansion Module 3
Revision value of the phone hardware.
Hardware Revision
Unique serial number of the phone.
Serial Number
Model number of the phone.
Model Number
Indicates whether is a voice message is waiting on the primary line for this phone.
Message Waiting
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
250
Remote Monitoring
Device Information
REVIEW DRAFT - CISCO CONFIDENTIAL
