Description
Item
Most recent time when an RTCP Receiver Report was received.
Rcvr Report Time
Received
(see note)
Voice Quality Metrics
Total number of concealment frames divided by total number of speech frames
that were received from the start of the voice stream.
Cumulative Conceal Ratio
Ratio of concealment frames to speech frames in preceding three-second interval
of active speech. If voice activity detection (VAD) is in use, a longer interval
might be required to accumulate 3 seconds of active speech.
Interval Conceal Ratio
Highest interval concealment ratio from start of the voice stream.
Max Conceal Ratio
Number of seconds that have concealment events (lost frames) from the start
of the voice stream (includes severely concealed seconds).
Conceal Secs
Number of seconds that have more than five percent concealment events (lost
frames) from the start of the voice stream.
Severely Conceal Secs
When the RTP Control Protocol is disabled, no data generates for this field and thus displays as 0.
Note
Related Topics
Cisco Unified IP Phone Settings, on page 101
Request information from phone in XML
For troubleshooting purposes, you can request information from the phone. The resulting information is in
XML format. The following information is available:
•
CallInfo is a list of the related information for a specific line.
•
LineInfo is a list of related information on the configured phone line.
•
ModelInfo is a list of the related information about the phone.
Before You Begin
Web access needs to be enabled to get the information.
The phone must be associated with a user.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
262
Remote Monitoring
Request information from phone in XML
REVIEW DRAFT - CISCO CONFIDENTIAL