8
Cisco Aironet 9.5-dBi Patch Antenna (AIR-ANT5195P-R)
78-16671-01
Installing the Antenna
Step 6
Position the antenna on the mounting plate.
Step 7
Place the screw cap washers onto the four #8-32 x 1-½-in. machine screws.
Step 8
Install the screws through the antenna mounting plate and install the #8 nuts.
Step 9
Tighten the #8 screws and nuts with a #2 Phillips screwdriver and an 11/32-in. (9-mm) wrench.
Caution
Do not overtighten the nuts. You could damage the antenna.
Step 10
Install the screw caps onto the screw cap washers.
Step 11
Route the antenna cable to the wireless device.
Note
Cisco recommends grounding the antenna. See the
“Grounding the Antenna” section on page 11
for details.
