7-13
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
OL-5048-02
Chapter 7 Troubleshooting
Reloading the Access Point/Bridge Image
Obtaining the Access Point/Bridge Image File
You can obtain the access point/bridge image file from the Cisco.com software center by following these
steps:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 12
Click
Option 2: Aironet Wireless Software Display Tables
.
Step 13
Find the access point firmware and utilities section and click
Cisco Aironet 1300 Series (Cisco IOS
Software)
.
Step 14
Click on the access point/bridge image file, such as
c1310-k9w7-tar.123-4.JA.tar
.
Step 15
On the Encryption Authorization Form, enter the requested information, read the encryption
information, and check the boxes that apply.
Step 16
Click
Submit
.
Step 17
Read and accept the terms and conditions of the Software License Agreement.
Step 18
Select the image file again to download it.
Step 19
Download and save the image file to your hard drive and then exit the web-browser.
Obtaining the TFTP Server Software
You can download TFTP server software from several web sites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.