11-20
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
OL-4059-01
Chapter 11 Configuring RADIUS and Servers
Configuring and Enabling
To disable AAA, use the
no aaa new-model
global configuration command. To disable AAA
authentication, use the
no aaa authentication login
{
default
|
list-name
}
method1
[
method2...
] global
configuration command. To either disable authentication for logins or to return to the default
value, use the
no login authentication
{
default
|
list-name
} line configuration command.
Configuring Authorization for Privileged EXEC Access and Network Services
AAA authorization limits the services available to an administrator. When AAA authorization is
enabled, the bridge uses information retrieved from the administrator’s profile, which is located either
in the local user database or on the security server, to configure the administrator’s session. The
administrator is granted access to a requested service only if the information in the administrator profile
allows it.
You can use the
aaa authorization
global configuration command with the
keyword to set
parameters that restrict an administrator’s network access to privileged EXEC mode.
Step 3
aaa authentication login
{
default
|
list-name
}
method1
[
method2...
]
Create a login authentication method list.
•
To create a default list that is used when a named list is
not
specified
in the
login authentication
command, use the
default
keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all interfaces.
•
For
list-name
, specify
a character string to name the list you are
creating.
•
For
method1...
, specify the actual method the authentication
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
•
line
—Use the line password for authentication. You must define a
line password before you can use this authentication method. Use the
password
password
line configuration command.
•
local
—Use the local username database for authentication. You must
enter username information into the database. Use the
username
password
global configuration command.
•
—Uses authentication. You must configure the
server before you can use this authentication method.
Step 4
line
[
console
|
tty
|
vty
]
line-number
[
ending-line-number
]
Enter line configuration mode, and configure the lines to which you want
to apply the authentication list.
Step 5
login authentication
{
default
|
list-name
}
Apply the authentication list to a line or set of lines.
•
If you specify
default
, use the default list created with the
aaa
authentication login
command.
•
For
list-name
, specify the list created with the
aaa authentication
login
command.
Step 6
end
Return to privileged EXEC mode.
Step 7
show running-config
Verify your entries.
Step 8
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
