11-21
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
OL-4059-01
Chapter 11 Configuring RADIUS and Servers
Configuring and Enabling
The
aaa authorization exec local
command sets these authorization parameters:
•
Use for privileged EXEC access authorization if authentication was performed by using
.
•
Use the local database if authentication was not performed by using .
Note
Authorization is bypassed for authenticated administrators who log in through the CLI even if
authorization has been configured.
Beginning in privileged EXEC mode, follow these steps to specify authorization for
privileged EXEC access and network services:
To disable authorization, use the
no aaa authorization
{
network
|
exec
}
method1
global configuration
command.
Starting Accounting
The AAA accounting feature tracks the services that administrators are accessing and the amount of
network resources that they are consuming. When AAA accounting is enabled, the bridge reports
administrator activity to the security server in the form of accounting records. Each
accounting record contains accounting attribute-value (AV) pairs and is stored on the security server.
This data can then be analyzed for network management, client billing, or auditing.
Beginning in privileged EXEC mode, follow these steps to enable accounting for each Cisco
IOS privilege level and for network services:
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
aaa authorization network
Configure the bridge for administrator authorization for all
network-related service requests.
Step 3
aaa authorization exec
Configure the bridge for administrator authorization to
determine if the administrator has privileged EXEC access.
The
exec
keyword might return user profile information (such as
autocommand
information).
Step 4
end
Return to privileged EXEC mode.
Step 5
show running-config
Verify your entries.
Step 6
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
aaa accounting network start-stop
Enable accounting for all network-related service requests.
Step 3
aaa accounting exec start-stop
Enable accounting to send a start-record accounting notice at
the beginning of a privileged EXEC process and a stop-record at the end.
Step 4
end
Return to privileged EXEC mode.
