manualshive.com logo in svg

Cisco Aironet 1400 Series, Software Manual

The Cisco Aironet 1400 Series is an advanced wireless communication device designed to provide seamless connectivity. Enhance your understanding of its features and functionality with the comprehensive Software Manual available for free download at 88.208.23.73:8080. Get detailed instructions and unleash the full potential of this remarkable product.

Share
Download
background image

 

17-28

Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide

OL-4059-01

Chapter 17      Managing Firmware and Configurations

Working with Software Images

RCP requires a client to send a remote username on each RCP request to a server. When you copy an 
image from the bridge to a server by using RCP, the Cisco IOS software sends the first valid username 
in this list:

•

The username specified in the 

archive download-sw

 or 

archive upload-sw 

privileged EXEC 

command if a username is specified.

•

The username set by the 

ip rcmd remote-username

 

username

 global configuration command if the 

command is entered.

•

The remote username associated with the current TTY (terminal) process. For example, if the user 
is connected to the router through Telnet and was authenticated through the 

username

 command, 

the bridge software sends the Telnet username as the remote username. 

•

The bridge host name.

For the RCP copy request to execute successfully, an account must be defined on the network server for 
the remote username. If the server has a directory structure, the image file is written to or copied from 
the directory associated with the remote username on the server. For example, if the image file resides 
in the home directory of a user on the server, specify that user’s name as the remote username. 

Before you begin downloading or uploading an image file by using RCP, do these tasks:

•

Ensure that the workstation acting as the RCP server supports the remote shell (rsh).

•

Ensure that the bridge has a route to the RCP server. The bridge and the server must be in the same 
subnetwork if you do not have a router to route traffic between subnets. Check connectivity to the 
RCP server by using the 

ping

 command.

•

If you are accessing the bridge through a Telnet session and you do not have a valid username, make 
sure that the current RCP username is the one that you want to use for the RCP download. You can 
enter the 

show users

 privileged EXEC command to view the valid username. If you do not want to 

use this username, create a new RCP username by using the 

ip rcmd remote-username

 

username

 

global configuration command to be used during all archive operations. The new username is stored 
in NVRAM. If you are accessing the bridge through a Telnet session and you have a valid username, 
this username is used, and there is no need to set the RCP username. Include the username in the 

archive download-sw

 or 

archive upload-sw

 privileged EXEC command if you want to specify a 

username only for that operation. 

•

When you upload an image to the RCP to the server, it must be properly configured to accept the 
RCP write request from the user on the bridge. For UNIX systems, you must add an entry to the 
.rhosts file for the remote user on the RCP server. For example, suppose the bridge contains these 
configuration lines:

hostname ap1

ip rcmd remote-username User0

If the bridge IP address translates to 

ap1.company.com

, the .rhosts file for User0 on the RCP server 

should contain this line:

ap1.company.com ap1

For more information, refer to the documentation for your RCP server.

Summary of Contents for Aironet 1400 Series































































































































































































































































































Reviews:

No comments

Related manuals for Aironet 1400 Series

Barco EX Safety Manual preview
EX
Brand: Barco Pages: 100
Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
IEI Technology WSB-H610 User Manual preview
WSB-H610
Brand: IEI Technology Pages: 187
IEI Technology TANK-XM811 User Manual preview
TANK-XM811
Brand: IEI Technology Pages: 71
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Brand: Garland Pages: 6
Cypress Semiconductor CY7C1034DV33 Specification Sheet preview
CY7C1034DV33
Brand: Cypress Semiconductor Pages: 9
ESD ECS-CPCIs/FPGA Hardware Manual preview
ECS-CPCIs/FPGA
Brand: ESD Pages: 28
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Brand: Patton electronics Pages: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Brand: Lanner Pages: 78
Z3 Technology SBE264-10-RPS User Instructions preview
SBE264-10-RPS
Brand: Z3 Technology Pages: 87
ActionTec GT704WR User Manual preview
GT704WR
Brand: ActionTec Pages: 115
ZyXEL Communications VMG5313-BXB SERIES Quick Start Manual preview
VMG5313-BXB SERIES
Brand: ZyXEL Communications Pages: 2
Magma ExpressBox2 EB2 User Manual preview
ExpressBox2 EB2
Brand: Magma Pages: 74
Teridian 71M6533 Quick Start Manual preview
71M6533
Brand: Teridian Pages: 2
Multi-Tech RoteFinder RF500S User Manual preview
RoteFinder RF500S
Brand: Multi-Tech Pages: 134
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Brand: NetComm Pages: 34
Renesas M32173T-PTC User Manual preview
M32173T-PTC
Brand: Renesas Pages: 7

Brands by name

Popular brands

Load more brands