2-10
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
Chapter 2 Understanding the Access Point GUI
Configuration Page
WAN Tab
The Configuration Wireless Access Network (WAN) tab (see
Figure 2-7
) contains the fields necessary
for you to configure the IP address of the Wireless LAN controller on your access point.
In the
Controller
section’s
IP Address
field, set the IP address of the primary wireless controller to
which the AP will join.
In the
Uplink IP Configuration
section, you can set the following parameters for IP configuration of
the WAN port:
•
Static IP
—Check this check box to specifying a static IP for the WAN port.
•
IP Address
—Set the IP address of the connection.
•
Subnet Mask
—Set the IP netmask of the connection.
•
Default Gateway
—Set the IP address of the default gateway for the connection.
•
Domain Name
—Enter the domain name as provided by your ISP. This is an optional field.
The DNS configuration section is optional. You can set the following parameters here:
•
Primary DNS Server
—Enter the IP address of a primary DNS server for resolving host names.
•
Secondary DNS Server
—Enter the IP address of a secondary DNS server for resolving host names.
Figure 2-7
Configuration-WAN Tab