2-16
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
Chapter 2 Understanding the Access Point GUI
Network Diagnostics
Running Network Diagnostics via Controller CLI
From the wireless LAN controller CLI, you can use the following command to run network diagnostics:
show ap network-diagnostics
ap-name
Example:
(Cisco Controller)>
show ap network-diagnostics
ap1
AP network diagnostics has been initiated
Waiting for network diagnostics to complete
======================= AP Network Diagnostics =====================
Speed Test Results:
DTLS Upload Speed ................ 10.83 Mbps
DTLS Download Speed ................ 9.87 Mbps
Non-DTLS Upload Speed ................ 22.29 Mbps
Non-DTLS Download Speed ................ 24.44 Mbps
Link Test Results:
Latency ................ 1 mSec
Jitter ................ 0 mSec
(Cisco Controller)>
Running Network Diagnostics via Controller GUI
You can initiate the network diagnostics tests from the
Network Diagnostics
tab in the controller GUI.
This tab is available at
Wireless > All APs > Details
.
