S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-197
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCDOMAIN Messages
Error Message
FCDOMAIN-3-PORT_SUSPENDED: Response (Cmd Code [hex]) for SWILS [hex]
intended for [chars] is received on [chars]
Explanation
An FC2 response frame (Command Code [hex]) for SWILS [hex] that was intended for
the interface [chars] has been received on [chars] instead.
Recommended Action
Check the configuration of both interfaces on the local switch and the
interfaces on the other side of their corresponding links. In particular, check whether they should all
belong to the same port channel.
Error Message
FCDOMAIN-3-SDWRAPBIND_FAILED: Bind to debug server failed
Explanation
Fcdomain feature has not been able to contact the debug service. Any problems
occurring in the fcdomain feature will not be logged.
Recommended Action
No action is required.
Error Message
FCDOMAIN-3-SDWRAPHISTINIT_FAILED: Initialization of history message
list failed.
Explanation
Fcdomain feature has not been able to contact the debug history service. Any problems
occurring in the fcdomain feature will not be logged to this debug history.
Recommended Action
No action is required.
Error Message
FCDOMAIN-3-VSAN_MERGE_DETECTED: Merge detected with VSAN [dec]
(Common Fabric Name [chars])
Explanation
The local VSAN and VSAN [dec] have the same principal switch [chars], therefore are
connected in the same logical fabric.
Recommended Action
No action is required.
FCDOMAIN-4
Error Message
FCDOMAIN-4-DM_ALLOWED_DM_LIST_MOD_ON_SUBORDINATE: Allowed domain
list for vsan [dec] modified on subordinate switch with fcdomain distribution
enabled
Explanation
When distRIBution is enabled, it is recommended to modify the allow domain list on
the principal switch only.
Recommended Action
Abort the current session on the local switch and start a new one on the
principal switch.
