S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-231
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FWM Messages
Error Message
FWM-1-FCFIB_HW_NO_VSAN: No hardware [chars] resources for route
creation to VSAN [dec]
Explanation
Hardware does not have sufficient resources to create this route.
Recommended Action
Delete unused VSANs.
Error Message
FWM-1-FCFIB_HW_NO_VSAN_DOM: No hardware [chars] resources for route
creation to VSAN [dec] Domain [dec]
Explanation
Hardware does not have sufficient resources to create this route.
Recommended Action
Delete unused VSANs or assign common Domain numbers to existing
VSANs.
Error Message
FWM-1-FCFIB_HW_PC_LIMIT: Failed to create [chars], hardware limit of
[dec] would be exceeded
Explanation
The number of hardware SAN Port Channels is limited by the platform.
Recommended Action
Configure fewer SAN Port Channels.
Error Message
FWM-1-FCFIB_LICENSE_UNAVAILABLE: License: [chars] is not installed.
System will not provide FC switching.
Explanation
Fibre Channel license is unavailable. The system will not provide FC switching.
Recommended Action
Install the license file to continue using the feature.
FWM-2
Error Message
FWM-2-FCFIB_CRIT: [chars]
Explanation
Fcfib encountered a catastrophic error.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
FWM-2-FWM_ASSERT_FAILURE: stack [[chars]]
Explanation
Critical assertion has failed in forwarding manager.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
