S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-508
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PORT Messages
Error Message
PORT-5-IF_DOWN_DPVM_VSAN_SUSPENDED: Interface [chars] is down
(dynamic vsan in suspended state)
Explanation
The specified dynamic VSAN is in suspended state.
Recommended Action
Un-suspend the dynamic VSAN.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION: Interface [chars] is down
(Isolation due to ELP failure)
Explanation
ELP failed on the interface.
Recommended Action
Check the output of 'show port internal info' in the 'ELP failure reason' field.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSF_PARAM_ERR: Interface
[chars] is down (Isolation due to ELP failure: class F param error)
Explanation
ELP failed on the interface due to class F param error.
Recommended Action
Configure the attached switchport correctly and try again.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSN_PARAM_ERR: Interface
[chars] is down (Isolation due to ELP failure: class N param error)
Explanation
ELP failed on the interface due to class N param error.
Recommended Action
Configure the attached switchport correctly and try again.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PAYLOAD_SIZE: Interface
[chars] is down (Isolation due to ELP failure: invalid payload size)
Explanation
ELP failed on the interface due to invalid payload size.
Recommended Action
Configure the attached switchport correctly and try again.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PORT_NAME: Interface
[chars] is down (Isolation due to ELP failure: invalid port name)
Explanation
ELP failed on the interface due to invalid port name.
Recommended Action
Configure the attached switchport correctly and try again.
Error Message
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_SWITCH_NAME: Interface
[chars] is down (Isolation due to ELP failure: invalid switch name)
Explanation
ELP failed on the interface due to invalid switch name.
Recommended Action
Configure the attached switchport correctly and try again.