S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-690
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message
SYSMGR-2-PSS2_VOLATILE_DB_FULL: Volatile database usage in kernel is
unexpectedly high at [dec]%.
Explanation
The system volatile database in kernel space is almost full.
Recommended Action
Please run the command 'system system internal pss kernel memstats'. If this
message continues to persist, please contact TAC.
Error Message
SYSMGR-2-PSS2FILE_CONVERT_FAILED: Conversion of file [chars] failed.
Explanation
Conversion of internal data format failed.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-REDSTATE_GETFAILED: Failed to request redundancy state:
[chars] (error-id [hex]).
Explanation
The local supervisor is unable to get the redundancy state.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-REDSTATE_SETFAILED: Failed to set redundancy state: ret_val
([dec]).
Explanation
The local supervisor is unable to get the redundancy state.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
SYSMGR-2-REDUNDANCY_CHANNEL_FAILURE: Remote sup will be rebooted
since its coming up as active when local sup is still active.
Explanation
Remote sup is becoming active although local sup is still active. As a result, local sup
will cause the remote sup to reset itself.
Recommended Action
If the problem persists, please contact customer support.
Error Message
SYSMGR-2-REDUNDANCY_HEARTBEAT_FAILURE: Heartbeat between active and
standby on the redundancy channel not working for last [dec] minutes.
Explanation
This supervisor is not receiving heartbeat on the redundancy channel from the other
supervisor. This can result in problems during switchover and switchover may even fail.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.