S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
2-817
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
WWN Messages
WWN-1
Error Message
WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain
Explanation
The WWN Manager has run out of WWNs. No new dynamically allocated WWNs are
available. However, statically assigned WWNs such as switch WWN, port WWN, etc. are still
available.
Recommended Action
Please add additional WWNs by programming a new Secondary MAC address
and its range.
Error Message
WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain
Explanation
The WWN Manager has run out of WWNs of NAA Types 2 and 5.
Recommended Action
Please add additional WWNs by programming a new Secondary MAC address
and its range.
WWN-2
Error Message
WWN-2-BKPLN_PROM_CANT_READ: Can not read backplane PROM
Explanation
The WWN Manager has failed to read chassis information. No dynamic WWNs could
be allocated.
Recommended Action
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message
WWN-2-EXITING: Exited due to [chars]
Explanation
The WWN Manager process has exited due to [char]. The process has probably been
restarted automatically.
Recommended Action
No action is required.
Error Message
WWN-2-GENERAL_ERROR: [chars]
Explanation
The WWN Manager has encountered a critical error. The description of the error is
[str.].
Recommended Action
No action is required.
