Access Service Security 4-7
Communicating Between the Access Server and the Security Server
Communicating with a Server
To enable communication between the security (database) server and the access server,
enter the commands listed in Table 4-3.
For more information about these commands, refer to the Security Command Reference, available
online at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/secur_c/
Table 4-3
Enabling Communication with a Server
Step
Command
Description
1
5300> enable
Password: <password>
5300#
Enter enable mode.
Enter the password.
You have entered enable mode when the
prompt changes to
5300#
.
2
5300# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
5300(config)#
Enter global configuration mode. You
have entered global configuration mode
when the prompt changes to
5300(config)#.
3
5300(config)# tacacs-server host alcatraz
Enter the IP address or host name of the
remote server host. The host
is typically a UNIX system running
software. In this example, the
host name is alcatraz.
4
5300(config)# tacacs-server key abra2cad
Enter a shared secret text string to be
used between the access server and the
server. The access server and
server use the shared secret
text string to encrypt passwords and
exchange responses. In this example, the
shared secret text string is abra2cad.
5
5300(config)# Ctrl-Z
5300#
%SYS-5-CONFIG_I: Configured from console by
console
5300#
Return to enable mode.
This message is normal and does not
indicate an error.
6
5300# copy running-config startup-config
Save the configuration changes to
NVRAM so that they are not lost during
resets, power cycles, or power outages.
Summary of Contents for AS5300 - Universal Access Server
