Using the Modem Code Bundled with Cisco IOS Software
Managing Modems A-25
Step 3
Verify the file has been copied into the access server Flash memory:
5300# show flash
System flash directory:
File Length Name/status
1 4530624 c5300-js-mz
2 210104 mica-modem-portware.x.x.x.x.bin
[747948 bytes used, 16029268 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
Step 4
Copy the modem code file from the access server Flash memory to the modems by
entering the copy flash modem command:
5300# copy flash modem
Modem Numbers (<slot>/<port> | group <number> | all)? all
System flash directory:
File Length Name/status
1 4530624 c5300-js-mz
2 210104 mica-modem-portware.x.x.x.x.bin
[747948 bytes used, 16029268 available, 16777216 total]
Name of file to copy? mica-modem-portware.x.x.x.x.bin
Type of service [busyout/reboot] busyout
Copy 'flash:mica-modem-portware.x.x.x.x.bin' from Flash to modems? [yes/no] yes
*Feb 27 21:17:43.574: %MODEM-5-DL_START: Modem (2/0) started portware download
.
.
.
*Feb 27 21:17:43.598: %MODEM-5-DL_START: Modem (2/13) started portware download
*Feb 27 21:17:53.598: %MODEM-5-DL_GOOD: Modem (2/14) completed portware download:
Note
The code is downloaded to the module, not the individual slots as shown.
Using the Modem Code Bundled with Cisco IOS Software
Use this procedure to update modem code on the modems in your access server if you decide to use
the version of modem code bundled with Cisco IOS software instead of the version already mapped
to your modems.
Caution
Cisco ships the access server with the latest version of modem code installed in the system Flash
memory and mapped to the modems. If you choose to use the modem code bundled with your installed
Cisco IOS software, you could be reverting to a previous version of modem code. Also note that once you
map the bundled modem code (using the copy system:/ucode/filename modem command—or, for
Cisco IOS releases earlier than 11.3AA or 12.0, the copy ios-bundled modem command) to your modems,
each time you upgrade the Cisco IOS software, the new bundled modem code is automatically mapped to your
modems. See “Displaying Modem Code Versions,” later in this appendix, for details on displaying modem
code versions mapped to modems, installed in system Flash memory, and bundled with the Cisco IOS
software on your access server.
Summary of Contents for AS5300 - Universal Access Server
