3-13
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Chapter 3
Installing the Cisco AS5350
Connecting a Signal Generator to the BITS Port
Figure 3-14 Connecting a Modem to the Auxiliary Port
Connecting a Signal Generator to the BITS Port
Use a coaxial cable to connect a Timing Signal Generator (TSG) to the BITS port. The BITS port is used
for external clocking. (See Figure 3-15.)
Figure 3-15 Connecting to the BITS Port
35677
Modem
RJ-45-to-DB-25 adapter
(labeled MODEM)
Auxiliary port
(RJ-45)
RJ-45-to-RJ-45
rollover cable
35841
BITS port
connector
To timing signal
generator
Coaxial cable
