-8
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Appendix
Replacing SDRAM DIMMs
Step 6
Pull the socket latches away from the DIMM, and then pull the DIMM out of the socket. (See
Figure A-5.) The latches hold the DIMM tightly, so be careful not to break the socket.
Caution
To prevent damage, do not press on the center of the DIMM. Handle the DIMM carefully.
Figure A-5
Removing and Replacing the SDRAM DIMM
Step 7
Position the new DIMM so that the polarization notch is located at the right end of the DIMM socket.
35685
