Index
IN-2
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
chassis LEDs, descriptions
4-2
Cisco AS5350, installation
3-1
Cisco AS5350 Chassis (figure)
A-13
Cisco AS5350 ground lug attachment (figure)
3-6
Cisco AS5350 overview
1-1
Cisco AS5400 ground lug attachment (figure)
3-6
connecting a modem to the auxiliary port
2-5
,
3-12
connecting a modem to the auxiliary port (figure)
3-13
connecting an alarm to the alarm port
3-14
connecting a PC to console port
2-4
connecting a signal generator to the BITS port
3-13
connecting the auxiliary port to a modem (figure)
C-4
connecting the console port to the PC (figure)
C-2
connecting the console port to the terminal (figure)
C-3
connecting the console terminal (figure)
3-12
connecting the DC power supply, single power
supply
B-13
connecting to a CSU/DSU (figure)
3-11
connecting to an E1 CSU/DSU (figure)
3-10
connecting to an Ethernet hub (figure)
3-7
connecting to a WAN
3-7
connecting to the auxiliary port
2-5
connecting to the BITS port (figure)
3-13
connecting to the network
3-6
Connections
preparing for network connections
2-3
T1 interface ports
3-8
WAN
3-8
connections, redundant power supply
3-18
,
B-4
connections, single power supply
3-17
,
B-3
console and auxiliary port pinouts and cables
C-1
Console Port
adapter
C-3
connections
3-11
default settings
2-4
description
2-4
pinouts
C-3
specification
1-4
console port cables and pinouts
C-2
console port description
2-4
console port signaling and cabling using a DB-25 adapter
(table)
C-3
console port signaling and cabling using a DB-9 adapter
(table)
C-3
conventions, document
viii
D
DC circuit breaker warning
B-15
DC power supply circuit breaker warning
3-19
DC power supply connections (figure)
3-17
DC power supply support
1-3
,
3-15
,
B-1
DC power supply wiring warning
3-17
,
B-13
description, slot numbering
4-3
dial feature card (DFC), description
1-2
dimensions, Cisco AS5350 chassis
1-3
disconnecting fan tray power connector (figure)
4-8
disconnecting the power connectors from the backplane
(figure)
B-9
disconnect power supplies warning
3-3
disconnect telephone cables warning
A-1
,
A-4
,
A-7
,
B-1
displaying environment status
4-4
document conventions
viii
documents, related
xii
DTE device, connecting to the console port
2-4
E
electrostatic discharge (ESD), preventing
2-2
environment monitoring
4-3
environment status, displaying
4-4
equipment racks
3-3
error messages, memory
A-6
,
A-12
Ethernet connections
2-4
,
3-7
Ethernet port pinouts
C-5
extracting boot rom (figure)
A-6
