2-5
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
78-17406-01
Chapter 2 Feature Card and Carrier Card Guidelines
Removing and Installing Populated Carrier Cards
Figure 2-5
Removing the Carrier Card from the Cisco AS5400XM
Step 5
After you remove the carrier card from the chassis, set it aside on an ESD-preventive mat.
Step 6
If the backplane slot is to remain empty, install a blank cover over the open slot to ensure proper airflow
inside the chassis. (See
Figure 2-6
.)
Figure 2-6
Blank Filler Panel
Installing a Populated Carrier Card
To install a populated carrier card:
Step 1
Slide the carrier card into the slot until it touches the backplane connector. (See
Figure 2-7
and
Figure 2-8
.)
Figure 2-7
Installing the Carrier Card in the Cisco AS5350XM
37160
36033
36004
