Description
LED
System operating status:
•
Green
–
Normal system function.
•
Amber
–
Critical alarm indicating one or more of the following:
•
Major failure of a hardware or software component.
•
Over-temperature condition.
•
Power voltage outside the tolerance range.
Status
Status of the failover pair:
•
Solid green
–
Failover pair operating normally.
•
Unlit
–
Failover is not operational.
Active
SSD LED behavior at first customer ship:
•
Unlit
–
No SSD present.
•
Green
–
SSD installed.
SSD LED behavior after June 2017:
•
Unlit
–
No SSD present or no activity on the SSD.
•
Green
–
Activity on the SSD.
See
Replace the SSD , on page 27
for information on replacing a failed
SSD.
Note
SSD
Network Port Status
On the rear panel, a pair of LEDs (Link status and connection Status) for each of the eight Gigabit Ethernet
network ports, and the Gigabit Ethernet Management port.
Link status (L):
•
Unlit
–
No link, or port is not in use.
•
Solid green
–
Link established.
•
Flashing green
–
Link activity.
Connection-speed status (S):
•
One blink every three seconds
–
10 Mbps.
•
Two rapid blinks
–
100 Mbps.
•
Three rapid blinks
–
1000 Mbps.
Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide
Online Only
5
Overview
LEDs
