manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

ASN Paging Controller and Location Registry Overview   

▀  Introduction 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

Step

 

Description

 

4

 

Upon receipt of the R4 LU_Req message, a relay PC ASN adds the anchor PC Relocation Destination TLV to initiate PC 
relocation. The message is forwarded to the anchor PC ASN. The new anchor PC ASN starts timer TR4_LU_Request.

 

5

 

If the current anchor PC ASN retains context information for the MS, including its authenticator ID, the current anchor PC 
ASN initiates a Context Request procedure with the anchor authenticator ASN. If the anchor authenticator ASN has valid 
key material for the MS, it returns AK context for the MS to the anchor PC ASN.

 

6

 

The current anchor PC ASN sends an R4 LU_Rsp message back to the new anchor PC ASN and starts timer 
TR4_LU_Conf. The message includes the MSID, BSID, authenticator ID, assigned PGID, Paging Offset, Paging Cycle, 
Anchor PC ID TLVs, and Location Update Status TLV set to Accept. The anchor PC Relocation Request Response TLV is 
set to Accept to indicate that the current anchor PC ASN accepted the PC_Relocation_Req and the anchor PC ID TLV is 
set to the identifier of the new anchor PC ASN ID which was received in the anchor PC Relocation Destination TLV in the 
R4 LU_Req message. The R4 LU_Rsp message also includes MS Info TLV containing the MS context for transfer to the 
new anchor PC ASN. If the new anchor PC ASN does not request PC Relocation, the current anchor PC MAY still request 
to perform the procedure by including the PC Relocation Indication TLV. If the new anchor PC does not accept the 
relocation, it reports a failure in step 17.

 

7

 

Upon receipt of the R4 LU_Rsp message from current anchor PC ASN, the new anchor PC ASN stops timer 
TR4_LU_Req, stores the MS context received from current anchor PC ASN, updates the paging information (Paging 
Group ID, Paging Cycle, Paging Offset), forwards the R4 LU_Rsp message on to the serving ASN, and starts timer 
TR4_LU_Conf.

 

8

 

Upon receipt of the R4 LU_Rsp message, the serving ASN-GW stops timer TR4_LU_Req, sends an R6 LU_Rsp message 
to the S-BS, and starts timer TR6_LU_Conf. The message includes the Location Update Status TLV set to Accept, MS 
Info, AK Context, anchor PC ID, and the old anchor PC ID TLV. The message may include the paging information TLVs 
if they were included in the corresponding R4 message.

 

9

 

Based on the AK and AK context received from the current anchor PC, the serving BS (associated with local PC/relay PC) 
successfully authenticates the RNG_REQ message received from the MS. The serving BS sends a RNG_RSP message with 
HMAC/CMAC and Successful Location Update Response indication to the MS.

 

10

 

The serving BS sends an R6 LU_Cnf message to the serving ASN-GW with Location Update TLV indicating success. 
Upon receipt of the message, the serving ASN-GW stops timer TR6_LU_Conf.

 

11

 

The serving ASN sends an R4 LU_Cnf message with a successful LU indication to new anchor PC ASN (as indicated by 
the anchor PC ID received from the BS) and stops timer TR6_LU_Req. Alternatively, the relay PC ASN forwards LU_Cnf 
to the ASN associated with new anchor PC with the result indication reassigned by the relay PC. Upon receipt of the 
message, new anchor PC ASN stops timer TR4_LU_Conf.

 

12

 

Upon receipt of the LU_Cnf message, the new anchor PC ASN sends an R4 PC_Relocation_Ind to the anchor DP/FA ASN, 
and starts timer TR4_PC_Reloc_Upd_ADP.

 

13

 

The anchor DP/FA ASN updates the anchor PC for the MS with the new anchor PC ASN ID and responds with an R4 
PC_Relocation_Ack message confirming the anchor PC update. Upon receipt of the message, the new anchor PC ASN 
stops timer TR4_PC_Reloc_Upd_ADP. The new anchor PC ASN hosts the anchor PC function and becomes the new 
current anchor PC ASN for the MS. The anchor PC is de-allocated from the old current anchor PC ASN.

 

14

 

Simultaneous with sending PC_Relocation_Ind to the anchor DP/FA, the new anchor PC sends an R4 PC Relocation 
Indication to the anchor authenticator ASN to inform the change of the anchor PC, and starts timer TR4- 
PC_Reloc_Upd_AA.

 

15

 

The anchor authenticator ASN updates the anchor PC for the MS with the new anchor PC ASN ID and responds with an R4 
PC_Relocation_Ack message confirming the anchor PC update. Upon receipt of the message, the new anchor PC ASN 
stops timer TR4-PC_Reloc_Upd_AA. At this point, new anchor PC ASN hosts the anchor PC function and becomes the 
new current Anchor PC ASN for the MS. The anchor PC is de-allocated from the old current anchor PC ASN.

 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

IBM 5100 Installation Manual preview
5100
Brand: IBM Pages: 64
4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Brand: 4RF Pages: 7
Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Brand: Barco Pages: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Brand: Barco Pages: 5
XOLTA BAT-80 User Manual preview
BAT-80
Brand: XOLTA Pages: 40
DCE ANS-205 User Manual preview
ANS-205
Brand: DCE Pages: 5
Deuba 101848 Assembly Instruction Manual preview
101848
Brand: Deuba Pages: 7
garofalo HIMALAYA 100.S/2/CC User Manual preview
HIMALAYA 100.S/2/CC
Brand: garofalo Pages: 12
IBM 84885BU Maintenance And Troubleshooting Manual preview
84885BU
Brand: IBM Pages: 200
IBM EXN4000 Installation And Setup Instructions preview
EXN4000
Brand: IBM Pages: 18
Nilox 16NX071900001 User Manual preview
16NX071900001
Brand: Nilox Pages: 66
NCR 7702-K260 Kit Instructions preview
7702-K260
Brand: NCR Pages: 10
IBM 4 GB Microdrive User Manual preview
4 GB Microdrive
Brand: IBM Pages: 98
Thecus D0204 Installation Manual preview
D0204
Brand: Thecus Pages: 6
Lowrance EP-85R Installation And Operation Instructions Manual preview
EP-85R
Brand: Lowrance Pages: 32
Rocstor ROCSERVE 4RMe Installation And Configuration Manual preview
ROCSERVE 4RMe
Brand: Rocstor Pages: 132
Glyph DV-Project Specification preview
DV-Project
Brand: Glyph Pages: 2

Brands by name

Popular brands

Load more brands