manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  GGSN Support in GPRS/UMTS Wireless Data Services 

How GGSN Works  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

1.

 

The Mobile Station (MS) goes through the process of attaching itself to the GPRS/UMTS network.

2.

 

The Terminal Equipment (TE) aspect of the MS sends AT commands to the Mobile Terminal (MT) aspect of the 

MS to place it into PPP mode.

The Link Control Protocol (LCP is then used to configure the Maximum-Receive Unit size and the 
authentication protocol (Challenge-Handshake Authentication Protocol (CHAP), Password Authentication 
Protocol (PAP), or none). If CHAP or PAP is used, the TE will authenticate itself to the MT, which, in turn, 
stores the authentication information.

Upon successful authentication, the TE sends an Internet Protocol Control Protocol (IPCP) Configure-Request 
message to the MT. The message will either contain a static IP home address to use or request that one be 
dynamically assigned.

3.

 

The MS sends an Activate PDP Context Request message that is received by an SGSN. The message contains 

information about the subscriber such as the Network layer Service Access Point Identifier (NSAPI), PDP 
Type, Access Point Name (APN), Quality of Service (QoS) requested, and PDP configuration options.

Note that regardless of whether or not the MS has a static address or is requesting a dynamic address, the 
―Requested PDP Address‖ field is omitted from the request when using Mobile IP.

4.

 

The SGSN authenticates the request message and sends a Create PDP Context Request message to a GGSN 

using the GPRS Tunneling Protocol (GTPC, ―C‖ indicates the control signaling aspect of the protocol). The 
recipient GGSN is selected based on either the request of the MS or is automatically selected by the SGSN. 
The message consists of various information elements including: PDP Type, Requested PDP con, APN, 
charging characteristics, and Tunnel Endpoint Identifier (TEID).

5.

 

The GGSN determines if it can facilitate the session (in terms of memory or CPU resources, configuration, etc.) 

and creates a new entry in its PDP context list and provides a Charging ID for the session.

From the APN specified in the message, the GGSN determines how to handle the PDP context including 
whether or not Mobile IP should be used.

If authentication is required, the GGSN attempts to authenticate the subscriber locally against profiles stored in 
memory or send a RADIUS Access-Request message to an AAA server.

6.

 

If the GGSN authenticated the subscriber to an AAA server, the AAA server responds with a RADIUS Access-

Accept message indicating successful authentication.

7.

 

The GGSN replies to the SGSN with a PDP Context Response using GTPC. The response will contain 

information elements such as the PDP Address, and PDP configuration options specified by the GGSN. Note 
that for Mobile IP, the GGSN returns a PDP Address of 0.0.0.0 indicating that it will be reset with a Home 
address after the PDP context activation procedure.

8.

 

The SGSN returns an Activate PDP Context Accept message to the MS. The message includes response to the 

configuration parameters sent in the initial request.

9.

 

The MT, will respond to the TE‘s IPCP Config-request with an IPCP Config-Ack message. This ends the PPP 

mode between the MT and TE components of the MS.

Data can now be transmitted between the MS and the GGSN.

10.

 

The FA component of the GGSN sends an Agent Advertisement message to the MS. The message contains the 

FA parameters needed by the mobile such as one or more card-of addresses. The message is sent as an IP 
limited broadcast message (i.e. destination address 255.255.255.255), however only on the requesting MS‘s 
TEID to avoid broadcast over the radio interface.

11.

 

The MS sends a Mobile IP Registration request to the GGSN/FA. This message includes either the MS‘s static 

home address or it can request a temporary address by sending 0.0.0.0 as its home address. Additionally, the 
request must always include the Network Access Identifier (NAI) in a Mobile-Node-NAI Extension.

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

TANDBERG VCS Administrator'S Manual preview
VCS
Brand: TANDBERG Pages: 276
NEC NEC Express5800 Series Initial Operation Verification Manual preview
NEC Express5800 Series
Brand: NEC Pages: 4
NEC NEC Express5800 Series Software Installation preview
NEC Express5800 Series
Brand: NEC Pages: 21
NEC NEC Express5800 Series Manual preview
NEC Express5800 Series
Brand: NEC Pages: 10
NEC NEC Express5800 Series System Configuration Manual preview
NEC Express5800 Series
Brand: NEC Pages: 22
TDC Netopia User Manual preview
Netopia
Brand: TDC Pages: 27
NEC NEC Express5800 Series Configuration Manual preview
NEC Express5800 Series
Brand: NEC Pages: 71
NEC NEC Express5800 Series Maintenance Manual preview
NEC Express5800 Series
Brand: NEC Pages: 166
NEC NEC Express5800 Series Notice preview
NEC Express5800 Series
Brand: NEC Pages: 16
IBM LS42 - BladeCenter - 7902 Service Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 194
U.S. Products maxg Quick Installation Manual preview
maxg
Brand: U.S. Products Pages: 80
Rocsecure ROCBIT 2 Instruction Manual preview
ROCBIT 2
Brand: Rocsecure Pages: 10
E-LINX EIR410-2SFP-T User Manual preview
EIR410-2SFP-T
Brand: E-LINX Pages: 24
Nexsan Nexsan Unity Hardware Maintenance Manual preview
Nexsan Unity
Brand: Nexsan Pages: 76
Supero SuperServer 6041G User Manual preview
SuperServer 6041G
Brand: Supero Pages: 114
Asante IntraCore 6524 User Manual preview
IntraCore 6524
Brand: Asante Pages: 150
IntesisBox Modbus Server-FC330A Installation Manual preview
Modbus Server-FC330A
Brand: IntesisBox Pages: 5
POCKetec POCKEY User Manual preview
POCKEY
Brand: POCKetec Pages: 19

Brands by name

Popular brands

Load more brands