manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  HRPD Serving Gateway Overview 

Features and Functionality - Base Software  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

platforms. The systems use the Charging Trigger Function (CTF) to transfer offline accounting records via a Diameter 
interface to an adjunct Charging Data Function (CDF) / Charging Gateway Function (CGF). The HSGW and Serving 
Gateway collect charging information for each mobile subscriber UE pertaining to the radio network usage while the P-
GW collects charging information for each mobile subscriber related to the external data network usage. 

The ASR 5000 Charging Trigger Function features dual redundant 140GB RAID hard drives and up to 100GB of 
capacity on each drive is reserved for writing charging records (CDRs, UDRs, and FDRs) to local file directories with 
non-volatile persistent memory. The CTF periodically uses the sFTP protocol to push charging files to the CDF/CGF. It 
is also possible for the CDF/CGF to pull offline accounting records at various intervals or times of the day. 

The HSGW, SGW and PGW collect information per-user, per IP CAN bearer or per service. Bearer charging is used to 
collect charging information related to data volumes sent to and received from the UE and categorized by QoS traffic 
class. Users can be identified by MSISDN or IMSI. Flow Data Records (FDRs) are used to correlate application 
charging data with EPC bearer usage information. The FDRs contain application level charging information like service 
identifiers, rating groups, IMS charging identifiers that can be used to identify the application. The FDRs also contain 
the authorized QoS information (QCI) that was assigned to a given flow. This information is used correlate charging 
records with EPC bearers. 

 

AAA Server Groups 

Value-added feature to enable VPN service provisioning for enterprise or MVNO customers. Enables each corporate 
customer to maintain its own AAA servers with its own unique configurable parameters and custom dictionaries. 

This feature provides support for up to 800 AAA server groups and 800 NAS IP addresses that can be provisioned 
within a single context or across the entire chassis. A total of 128 servers can be assigned to an individual server group. 
Up to 1,600 accounting, authentication and/or mediation servers are supported per chassis. 

Important:

 Due to additional memory requirements, this service can only be used with 8GB Packet Service Cards 

(PSCs). 

 

Dynamic Policy and Charging: Gxa Reference Interface 

Enables network initiated policy based usage controls for such functions as service data flow authorization for EPS 
bearers, QCI mapping, modified QoS treatments and per-APN AMBR bandwidth rate enforcement. 

As referenced in Figure 1 below, in an e-HRPD application the Gxa reference point is defined to transfer QoS policy 
information between the PCRF and Bearer Binding Event Reporting Function (BBERF) on the HSGW. In contrast with 
an S5/S8 GTP network model where the sole policy enforcement point resides on the PGW, the S2a model introduces 
the additional BBERF function to map EPS bearers to the main and auxiliary A10 connections. Gxa is sometimes 
referred to as an off-path signaling interface because no in-band procedure is defined to convey PCC rules via the 
PMIPv6 S2a reference interface. Gxa is a Diameter based policy signaling interface. 

Gxa signaling is used for bearer binding and reporting of events. It provides control over the user plane traffic handling 
and encompasses the following functionality: 

 

Provisioning, update and removal of QoS rules from PCRF to BBERF. 

 

Bearer binding: Associates Policy Charging and Control (PCC) rules with default or dedicated EPS bearers. For 

a service data flow that is under QoS control, the Bearer Binding Function (BBF) within the HSGW ensures 
that the service data flow is carried over the bearer with the appropriate QoS service class. 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

R/Evolution 2000 Series Getting Started Manual preview
2000 Series
Brand: R/Evolution Pages: 58
Acer ALTOS R910 Series Installation & Configuration Manual preview
ALTOS R910 Series
Brand: Acer Pages: 74
NEC Express5800/T110g-E Quick Start Manual preview
Express5800/T110g-E
Brand: NEC Pages: 2
Patton electronics 4520 Specification Sheet preview
4520
Brand: Patton electronics Pages: 2
Patton electronics 4520 Getting Started Manual preview
4520
Brand: Patton electronics Pages: 86
iDiskk mini Instruction Manual preview
mini
Brand: iDiskk Pages: 11
i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
Patton electronics 3120 Administrator'S Reference Manual preview
3120
Brand: Patton electronics Pages: 331
Navigloo 3120 Assembly Instructions Manual preview
3120
Brand: Navigloo Pages: 28
Olympus Camedia MAUSB-100 Quick Start Manual preview
Camedia MAUSB-100
Brand: Olympus Pages: 2
Omega Solid Stainless Steel Shelving Assembly Instructions preview
Solid Stainless Steel Shelving
Brand: Omega Pages: 2
Intenso 2,5" EXTERNAL HARD DRIVE KIT User Manual preview
2,5" EXTERNAL HARD DRIVE KIT
Brand: Intenso Pages: 94
OCZ Z-DRIVE R2 M84 512GB PCI-EXPRESS SSD Datasheet preview
Z-DRIVE R2 M84 512GB PCI-EXPRESS SSD
Brand: OCZ Pages: 2
DANE-ELEC So Mobile SuperSpeed Datasheet preview
So Mobile SuperSpeed
Brand: DANE-ELEC Pages: 1
TP-Link TL-SG2424P User Manual preview
TL-SG2424P
Brand: TP-Link Pages: 176
Kaser MiniDrive Quick Start Manual preview
MiniDrive
Brand: Kaser Pages: 3
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
Xigmatek Lighter 60 GB User Manual preview
Lighter 60 GB
Brand: Xigmatek Pages: 2

Brands by name

Popular brands

Load more brands