manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

Serving Gateway Overview   

▀  Features and Functionality - Base Software 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

Routing and Miscellaneous Features

 

 

OSPFv3 

 

MP-BGP v6 extensions 

 

IPv6 flows (Supported on all Diameter QoS and Charging interfaces as well as Inline Services (e.g. ECS, P2P 

detection, Stateful Firewall, etc) 

 

Lawful Intercept 

Provides a standardized architecture for lawful monitoring and interception of subscriber call content and control events 
as mandated by a court ordered warrant from a law enforcement agency. 

In accordance with 3GPP TS 33.108 Release 8 requirements the Cisco S-GW supports the Lawful Intercept Access 
Function for intercepting control and data messages of mobile targets. Law Enforcement Agencies request the network 
operator to start the interception of a particular mobile user based on court ordered subpoenas. 

 

The Cisco EPC gateways provide access to the intercepted Content of Communications (CC) and the Intercept Related 
Information (IRI) of the mobile target and services related to the target on behalf of Law Enforcement Agencies. In this 
release the S-GW supports the following three interfaces: 

 

X1 provisioning interface from Administrative Function (ADMF) using CLI over SSH: Intercept targets can be 

provisioned using subscriber information including MSISDN, IMSI and MEI. Interception of only events (IRI) 
or events and call content (IRI + CC) can be provisioned. 

 

X2 event delivery interface for transferring Intercept Related Information (IRI) to a Delivery Function/Mediation 

server: Intercepted events include QoS information (if available), bearer activation (Default and Dedicated 
bearer), start of intercept with bearer active, bearer modification, bearer deactivation, and UE requested bearer 
resource modification. 

 

X3 content delivery: Includes intercepted call content for all default and dedicated EPS bearers. 

The intercepted call control data is encoded in a Cisco proprietary message header format using an optional TLV field to 
pack the IRI information. The message header also includes other identifying information including sequence numbers, 
timestamps and session & correlation numbers to correlate session and bearer related information with interception on 
other EPC elements. If provisioning is activated while the call is active for the target identity then the intercepted 
information is immediately forwarded to the mediation server. Otherwise camp-on monitoring is used and the system 
waits for the call to become active (ECM CONNECTED state) and compares the IMSI, MSISDN and MEI against the 
LI monitoring list as a trigger to begin the intercept. 

A total of 20,000 simultaneous LI triggers can be provisioned on the Cisco P-GW, S-GW or MME. Our solution is 
currently interoperable with leading mediation solutions from partners such as SS8 and Utimaco. 

Important:

 

 

For more information on Lawful Intercept support, refer to the 

Lawful Intercept Configuration 

Guide

. 

 

Subscriber Level Trace 

Provides a 3GPP standards-based session level trace function for call debugging and testing new functions and access 
terminals in an LTE environment. 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

TANDBERG VCS Administrator'S Manual preview
VCS
Brand: TANDBERG Pages: 276
Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Brand: Billion Pages: 146
4IPNET WHG301 User Manual preview
WHG301
Brand: 4IPNET Pages: 97
LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Brand: LaCie Pages: 22
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
Leviton IPHS5-1LW Product Bulletin preview
IPHS5-1LW
Brand: Leviton Pages: 4
Seagate Momentus ST9120827AS Product Manual preview
Momentus ST9120827AS
Brand: Seagate Pages: 56
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
Digisol DG-BG100 User Manual preview
DG-BG100
Brand: Digisol Pages: 81
Lantronix xPico XPW100A003-01-B Integration Manual preview
xPico XPW100A003-01-B
Brand: Lantronix Pages: 54
Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual preview
IE-SW-VL09T-6TX-3SC
Brand: Weidmuller Pages: 14
Ravpower Power 7 Wi-Fi SD/USB Storage kit User Manual preview
Power 7 Wi-Fi SD/USB Storage kit
Brand: Ravpower Pages: 60
NetComm RTA100 User Manual preview
RTA100
Brand: NetComm Pages: 75
Proscend 6200-2W User Manual preview
6200-2W
Brand: Proscend Pages: 93
IBM Storwize V7000 Problem Determination Manual preview
Storwize V7000
Brand: IBM Pages: 314
SonicWALL 01-SSC-1954 Installation Manual preview
01-SSC-1954
Brand: SonicWALL Pages: 2

Brands by name

Popular brands

Load more brands