manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  Enhanced Charging Service Overview 

Accounting Interfaces  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

Diameter Accounting and Credit Control 

The Diameter Credit Control Application (DCCA) is used to implement real-time online and/or offline charging and 
credit control for a variety of services, such as network access, messaging services, and download services. 

 

In addition to being a general solution for real-time cost and credit control, DCCA includes these features: 

 

 

Real-time Rate Service Information

: DCCA can verify when end subscribers' accounts are exhausted or 

expired; or deny additional chargeable events. 

 

Support for Multiple Services:

 DCCA supports the usage of multiple services within one subscriber session. 

Multiple service support includes: 

 

The ability to identify and process the service or group of services that are subject to different cost 

structures. 

 

Independent credit control of multiple services in a single credit control sub-session. 

 

Gx Interface Support 

Important:

 

 

This feature is only available in GGSN/UMTS networks. 

The Gx interface is used in IMS deployment in GPRS/UMTS networks. Gx interface support on the system enables 
wireless operators to intelligently charge the services accessed depending on the service type and parameters with rules. 
It also provides support for IP Multimedia Subsystem (IMS) authorization in a GGSN service. The goal of the Gx 
interface is to provide network-based QoS control as well as dynamic charging rules on a per bearer basis for an 
individual subscriber. The Gx interface is in particular needed to control and charge multimedia applications. 

Rel 6. Gx Interface

: The provisioning of charging rules that are based on the dynamic analysis of flows used for the 

IMS session is carried out over the Gx interface. The Rel. 6 Gx interface is located between the Access Gateway 
functioning as Traffic Plane Function (TPF), and the Charging Rule Function (CRF). The GGSN/TPF acts as the client 
where as the CRF contains the Diameter server functionality. Rel. 6 Gx interface is based on the Diameter base protocol 
(DIABASE) and the Diameter Credit Control Application (DCCA) standard. 

Rel. 7 Gx Interface

: The Rel. 7 Gx interface enables policy-based admission control support (enforcing policy control 

features like gating, bandwidth limiting, etc.,) and Flow-based Charging (FBC). This is accomplished via dynamically 
provisioned Policy Control and Charging (PCC) rules. These PCC rules are used to identify service data flows and do 
charging. Other parameters associated with the rules are used to enforce policy control. 

The PCC architecture allows operators to perform service-based QoS policy, and flow-based charging control. In the 
PCC architecture, this is accomplished mainly by the Policy and Charging Enforcement Function (PCEF)/GGSN and 
the Policy and Charging Rules Function (PCRF). 

Important:

 

 

For more information on Gx interface support, see 

Gx Interface Support

 chapter of the 

System 

Enhanced Feature Configuration Guide

. 

 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

D-Link DSL-500 Quick Start Manual preview
DSL-500
Brand: D-Link Pages: 11
D-Link AirPlus DWL-810 Quick Installation Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 8
D-Link DHP-601AV Quick Installation Manual preview
DHP-601AV
Brand: D-Link Pages: 84
D-Link ShareCenter DNS-343 Quick Install Manual preview
ShareCenter DNS-343
Brand: D-Link Pages: 12
D-Link AirPlus G DWL-G710 Troubleshooting preview
AirPlus G DWL-G710
Brand: D-Link Pages: 5
D-Link AC750 Quick Install Manual preview
AC750
Brand: D-Link Pages: 12
D-Link DSL-2640BT Installation Manual preview
DSL-2640BT
Brand: D-Link Pages: 12
360 Systems MAXX-2400-HD Specification preview
MAXX-2400-HD
Brand: 360 Systems Pages: 8
PaloAlto Networks ION 1200 Series Hardware Reference Manual preview
ION 1200 Series
Brand: PaloAlto Networks Pages: 90
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
LTS LTAH103C Hardware Integration Manual preview
LTAH103C
Brand: LTS Pages: 5
IBM OpenPower 720 Technical Overview And Introduction preview
OpenPower 720
Brand: IBM Pages: 74
Macpower & Tytech M9 - NDAS User Manual preview
M9 - NDAS
Brand: Macpower & Tytech Pages: 21
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
Intel SBXL52 - Server Compute Blade Hardware Maintenance Manual preview
SBXL52 - Server Compute Blade
Brand: Intel Pages: 126
Galleon NTS-6001 Configuration Manual preview
NTS-6001
Brand: Galleon Pages: 47
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
IBM Deskstar 16GP Installation Manual preview
Deskstar 16GP
Brand: IBM Pages: 2

Brands by name

Popular brands

Load more brands