manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

Mobility Management Entity Overview   

▀  Features and Functionality - Base Software 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

Important:

 

 

For more information on command line interface based management, refer 

Command Line Interface 

Reference

. 

 

Bulk Statistics Support 

The system's support for bulk statistics allows operators to choose to view not only statistics that are of importance to 
them, but also to configure the format in which it is presented. This simplifies the post-processing of statistical data 
since it can be formatted to be parsed by external, back-end processors. 

When used in conjunction with the Web Element Manager, the data can be parsed, archived, and graphed. 

The system can be configured to collect bulk statistics (performance data) and send them to a collection server (called a 
receiver). Bulk statistics are statistics that are collected in a group. The individual statistics are grouped by schema. 
Following is a partial list of supported schemas: 

 

 

System

: Provides system-level statistics 

 

Card

: Provides card-level statistics 

 

Port

: Provides port-level statistics 

 

MME

: Provides MME service statistics 

 

GTPC

: Provides GPRS Tunneling Protocol - Control message statistics 

 

GTPU

: Provides GPRS Tunneling Protocol - User message statistics 

The system supports the configuration of up to 4 sets (primary/secondary) of receivers. Each set can be configured with 
to collect specific sets of statistics from the various schemas. Statistics can be pulled manually from the chassis or sent 
at configured intervals. The bulk statistics are stored on the receiver(s) in files. 

The format of the bulk statistic data files can be configured by the user. Users can specify the format of the file name, 
file headers, and/or footers to include information such as the date, chassis host name, chassis uptime, the IP address of 
the system generating the statistics (available for only for headers and footers), and/or the time that the file was 
generated. 

When the Web Element Manager is used as the receiver, it is capable of further processing the statistics data through 
XML parsing, archiving, and graphing. 

The Bulk Statistics Server component of the Web Element Manager parses collected statistics and stores the information 
in the PostgreSQL database. If XML file generation and transfer is required, this element generates the XML output and 
can send it to a Northbound NMS or an alternate bulk statistics server for further processing. 

Additionally, if archiving of the collected statistics is desired, the Bulk Statistics server writes the files to an alternative 
directory on the server. A specific directory can be configured by the administrative user or the default directory can be 
used. Regardless, the directory can be on a local file system or on an NFS-mounted file system on the Web Element 
Manager server. 

 

Threshold Crossing Alerts (TCA) Support 

Thresholding on the system is used to monitor the system for conditions that could potentially cause errors or outage. 
Typically, these conditions are temporary (i.e high CPU utilization, or packet collisions on a network) and are quickly 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
IBM System Storage TS2900 Manual preview
System Storage TS2900
Brand: IBM Pages: 130
Supero SuperServer 5013C-MT User Manual preview
SuperServer 5013C-MT
Brand: Supero Pages: 98
HELVAR Imagine 920 Installation Manual preview
Imagine 920
Brand: HELVAR Pages: 2
Mobatime DTS 4132.timeserver Mounting And Instruction Manual preview
DTS 4132.timeserver
Brand: Mobatime Pages: 108
Supermicro SuperWorkstation 740A-T User Manual preview
SuperWorkstation 740A-T
Brand: Supermicro Pages: 138
G-Technology G-Drive ev SSD Product Manual preview
G-Drive ev SSD
Brand: G-Technology Pages: 33
SanDisk CompactFlash 5000 Product Manual preview
CompactFlash 5000
Brand: SanDisk Pages: 20
Supero SUPERSERVER 6028TP-HTFR User Manual preview
SUPERSERVER 6028TP-HTFR
Brand: Supero Pages: 141
Sun Microsystems Netra T2000 Service Manual preview
Netra T2000
Brand: Sun Microsystems Pages: 138
LaCie 301359U User Manual preview
301359U
Brand: LaCie Pages: 37
U-Line H-3619 Assembly Instructions Manual preview
H-3619
Brand: U-Line Pages: 15
Altos R380 F5 User Manual preview
R380 F5
Brand: Altos Pages: 93
Telestar DIGIBIT R1 Operating Manual preview
DIGIBIT R1
Brand: Telestar Pages: 16
EMC SVR-I2U-R2312 Installation And Maintenance Manual preview
SVR-I2U-R2312
Brand: EMC Pages: 34
Western Digital My Passport Essential SE Hardware preview
My Passport Essential SE
Brand: Western Digital Pages: 2
JOBO GIGA ONE ULTRA Instruction Manual preview
GIGA ONE ULTRA
Brand: JOBO Pages: 20

Brands by name

Popular brands

Load more brands