manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

Glossary   

▀  Environmental Information 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

CLCI Server.

 DCCA server typically located in the Online Charging System. 

CDMA.

 Code Division Multiple Access. One of three wireless technology classes that encompasses 2G, 2.5G, and 3G 

communications. The other two are GSM and TDMA. 

cdmaOne.

 Defines the 2G and 2.5G versions of CDMA technology. Based on IS-95A and IS-95B standards 

respectively. 

CDMA2000.

 Defines the 3G version of CDMA technology. 

CDR. Charging Data Record.

 A GTPP-based subscriber accounting record. Charging data record (also known as call 

detail record) consists of formatted information that includes event-based billing information such as call duration. 
Different systems generate different types of CDRs. The types, content and handling of CDRs is defined in various 
3GPP specs within the TS 32.2xx series, 

Cell.

 The unit of a base station having the ability to radiate in a given geographic area; a ―sector‖ or ―face‖ of a physical 

radio equipment implementation. 

CFE. Common Firmware Environment.

 The system hardware that contains control processor-based software within 

the system. 

CG. Charging Gateway.

 The device on the GSM GPRS or UMTS network that collects and maintains Call Detail 

Records (CDRs) for subscriber PDP contexts. Also referred to as a Charging Gateway function (CGF). 

CGF.

 See CG. 

Charging Rule.

 A set of information including the service data flow filters (IP 5 tuple), the gating status (pass/drop 

packets matching the rule) and the rating group, for a single service data flow. For an IMS media component a charging 
rule typically defines a single IP flow associated to a media component (e.g. RTP or RTCP). 

CLI.

 Command Line Interface. A Man-machine Interface (MMI) used to configure, monitor, and administer a network 

device through its Operating System (OS). 

CSG.

. Closed Subscriber Group. A Closed Subscriber Group identifies subscribers of an operator who are permitted to 

access one or more cells of the PLMN but which have restricted access (CSG cells). 

CSG Cell

. A CSG cell, part of the PLMN, broadcasting a specific CSG identity. A CSG cell is accessible by the 

members of the closed subscriber group for that CSG identity. All the CSG cells sharing the same CSG identity use the 
same radio access technology. 

CSG ID

. A CSG ID is an identifier associated to a cell or group of cells to which access is restricted to a defined group 

of users. 

Current EPS security context

. the EPS security context which has been taken into use by the network most recently. 

Current serving cell. This is the cell on which the MS is camped. 

CO.

 Central Office. The telecommunications facility where calls are switched. 

Context.

 A specific group of configuration parameters that apply to the ports, interfaces, protocols, and services 

supported by a system. Each system can support multiple contexts and each context can reside as a separate, logically 
independent instance. Multiple context support allows numerous like or disparate services to exist on the same physical 
hardware. 

CORBA.

 Common Object Request Broker Architecture. The Object Management Group's (MAG‘s) core specification 

for distributed object interoperability. 

Correspondent node.

 A node that sends or receives a packet to an MN; the correspondent node may be another mobile 

node or a non-mobile Internet node. 

CP.

 Control Processor, a high-speed state-of-the-art CPU used by the system. 

CSP

. Card Slot Port subsystem. This is a software subsystem that manages all cards, slots, and physical ports installed 

in a system. 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

DB GROUP HERRAJES 803 Assembly Instruction preview
803
Brand: DB GROUP HERRAJES Pages: 4
NEC Built-In AIT User Manual preview
Built-In AIT
Brand: NEC Pages: 59
NEC Express5800/320Ma Software Installation And Configuration Manual preview
Express5800/320Ma
Brand: NEC Pages: 86
IBM i Series Handbook preview
i Series
Brand: IBM Pages: 908
Hama FlashPen "Piko" Operating Instruction preview
FlashPen "Piko"
Brand: Hama Pages: 4
LaCie LITTLE BIG DISK THUNDERBOLT 2 Getting Connected preview
LITTLE BIG DISK THUNDERBOLT 2
Brand: LaCie Pages: 6
Raidon InTANK iR2775-S3 User Manual preview
InTANK iR2775-S3
Brand: Raidon Pages: 21
Raidon GT8670-TB3 Quick Setup Manual preview
GT8670-TB3
Brand: Raidon Pages: 2
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
Teknim TWM-1886 Installation & User Manual preview
TWM-1886
Brand: Teknim Pages: 10
SanDisk Cruizer Enterprise Product Specifications preview
Cruizer Enterprise
Brand: SanDisk Pages: 10
Quantum StorNext QD7000 Manual preview
StorNext QD7000
Brand: Quantum Pages: 29
IBM eServer 130 xSeries User Reference Manual preview
eServer 130 xSeries
Brand: IBM Pages: 156
E-TOP PR126g User Manual preview
PR126g
Brand: E-TOP Pages: 24
Intellinet 561051 Quick Install Manual preview
561051
Brand: Intellinet Pages: 12
garofalo HIMALAYA 100.S/2/CC User Manual preview
HIMALAYA 100.S/2/CC
Brand: garofalo Pages: 12
Quictent WGB-01 User Manual preview
WGB-01
Brand: Quictent Pages: 24

Brands by name

Popular brands

Load more brands