manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

Glossary   

▀  Environmental Information 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

PDP Session

. unique association of a subscriber with a network access service given by the combination of MSISDN, 

APN and IP address. A PDP session can consist of one or more PDP contexts (one primary and zero or more 
secondary). 

PDSN.

 Packet Data Serving Node. The PDSN is a part of the 3G network that performs packet processing and re-

direction to the mobile user's home network through communications with the Home Agent (HA). 

PEP.

 Performance Enhancing Proxy. PEP is used to improve the performance of the Internet protocols (e.g., TCP) on 

network paths where native performance suffers due to characteristics of a link or sub-network on the path. 

Pi Interface.

 The packet data interface from the Foreign Agent to Internet or Home Agent. 

Plain NAS message

. a NAS message with a header including neither a message authentication code nor a sequence 

number. 

PLMN. Public Land Mobile Network.

 A term used to designate a GSM, GPRS or UMTS public mobile 

communications network 

Point Code (PC). A unique address for a node in an SS7 environment.

 

Policy Decision.

 The set of policy information AGW receives from E-PDF in a Gx/Ty Diameter message. E-PDF 

constructs policy decision on the basis of Application Function events and events received over Gx/Ty interface

.

 

Policy Information.

 The set of policy related data stored in E-PDF associated to a user, including information 

determined via real-time analysis of an SDP offer/answer exchange derived information in the context of an IMS 
session, information derived from a pre configured charging rule and preconcerted rule set. These information includes 
at least charging rules, media component data, binding information and authorized QoS. Policy information such as 
charging rules and authorized QoS are sent in a policy decision by the E-PDF to the AGW for enforcement. 

Pool-area

. A pool area is an area within which a MS may roam without need to change the serving CN node. A pool 

area is served by one or more CN nodes in parallel. All the cells controlled by a RNC or BSC belong to the same one (or 
more) pool area(s). 

Port.

 A defined physical or logical connection where data enters or leaves a network device. 

POS.

 Packet over SONET. 

Preconcerted Charging Rule.

 Charging rule created and configured in E-PDF by the operator. 

PPP.

 Point-to-Point Protocol. A protocol defined by RFC-1661 that allows for IP connectivity between network 

devices. 

Primary PDP Context.

 The first PDP context activated by a UE. At the primary PDP context activation an IP address 

(the PDP address) is assigned to a UE. When activated a primary PDP context is general purpose (i.e. with no associated 
TFT filters), during its lifetime may change to dedicated (i.e. with associated TFT filters). 

PTI

. Procedure Transaction Identity. An identity which is dynamically allocated by the UE for the UE requested ESM 

procedures. The procedure transaction identity is released when the procedure is completed. 

PSC.

 Packet Services Card. The PSC is an application card providing memory and processing capabilities for handling 

subscriber sessions.  

Pull Model.

 A communication model where a policy decision is requested by the AGW. 

Push Model.

 A communication model where a policy decision is sent unsolicited by the authorizing entity (i.e. E-PDF) 

to the AGW. 

Q

 

QoS.

 Quality of Service. A measure of the service quality provided to a subscriber. In the IP environment, this relates to 

acceptable levels of quality including bandwidth guarantees, latency, packet ordering, and other service-related levels of 
service. 

R

 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

Acano Solution Installation Manual preview
Solution
Brand: Acano Pages: 17
Seagate Hawk 1 ST11200N Product Manual preview
Hawk 1 ST11200N
Brand: Seagate Pages: 84
Qualstar RLS-4470 Technical & Service Manual preview
RLS-4470
Brand: Qualstar Pages: 205
Quantum ValueLoader LTO-1 User Manual preview
ValueLoader LTO-1
Brand: Quantum Pages: 76
SimpleTech Zeus IOPS Product Manual preview
Zeus IOPS
Brand: SimpleTech Pages: 84
Nexxt NOVA300 AML02304U1 User Manual preview
NOVA300 AML02304U1
Brand: Nexxt Pages: 75
DHD Power Cruiser 52/XR Manual preview
52/XR
Brand: DHD Power Cruiser Pages: 60
Proxim TeraBridge 5845 Specifications preview
TeraBridge 5845
Brand: Proxim Pages: 4
IBM TotalStorage Network Attached Storage 300G User Reference preview
TotalStorage Network Attached Storage 300G
Brand: IBM Pages: 86
Raidon InTANK iR2775-S3 Quick Installation Manual preview
InTANK iR2775-S3
Brand: Raidon Pages: 2
TP-Link TL-WR703N Quick Installation Manual preview
TL-WR703N
Brand: TP-Link Pages: 17
Patton SN4524 Setup Manual preview
SN4524
Brand: Patton Pages: 15
HPE PoLiant DL 180 Dissambly Instruction preview
PoLiant DL 180
Brand: HPE Pages: 4
morse 185XGR Operator'S Manual preview
185XGR
Brand: morse Pages: 6
Hitachi HTS541680J9SA00 - Travelstar 80 GB Hard Drive Specifications preview
HTS541680J9SA00 - Travelstar 80 GB Hard Drive
Brand: Hitachi Pages: 167
Hitachi HTS541616J9AT00 - Travelstar 160 GB Hard Drive Install Manual preview
HTS541616J9AT00 - Travelstar 160 GB Hard Drive
Brand: Hitachi Pages: 2
Hitachi HTS721010G9AT00 Quick Installation Manual preview
HTS721010G9AT00
Brand: Hitachi Pages: 2
Hitachi HTS541616J9AT00 - Travelstar 160 GB Hard Drive Specifications preview
HTS541616J9AT00 - Travelstar 160 GB Hard Drive
Brand: Hitachi Pages: 188

Brands by name

Popular brands

Load more brands