manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  ASN Paging Controller and Location Registry Overview 

Introduction  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

Step

 

Description

 

3

 

The anchor PC/LR retrieves the information related to the MS and sends an R4 Initiate_Paging_Rsp to Anchor Data Path 
function. This message indicates whether the MS context as contained in the PC/LR is correct and the requested paging 
action is authorized. Exclusion of the Response Code TLV indicates intent to page the MS. Upon receipt of this message 
the anchor DP Function starts timer TInit_Page_Req if running.

 

4

 

If paging action is authorized, the anchor PC retrieves the MS paging information and constructs Paging_Announce 
message. The anchor PC issues one or more Paging_Announce messages based on its knowledge of the paging region 
topology. The anchor PC starts a timer TR4_Paging_Announce when it sends out the first Paging_Announce message and 
waits for the paging response. The anchor PC sets a paging re-transmission counter  . If the anchor PC does not receive a 
paging response, it retransmits the Paging_Announce message prior to the expiration of the timer TR4_Paging_Announce. 
If the anchor PC is topologically aware of the defined Paging Group (PG), including the last BS from which the MS 
performed location update, the anchor PC directly issues Paging_Announce messages to all or some subset of the paging 
group members. The members consist of BSs and/or relay PCs in the region. If the anchor PC is topologically unaware of 
the paging region or the BSs defined in the paging group, the Paging_Announce messages are sent to the known relay 
PC(s). The relay PC(s) forwards the announce message to one or more BSs in the paging region.

 

5

 

The ASN Gateway that contains the local/relay PC function for the MS initiates the paging operation and sends the R6 
Paging_Announce message to the BS(s) associated with the Paging Group ID (PGID) received in R4 Paging_Announce. 
The ASN Gateway performs single- or multi-step paging based on whether the BS ID TLV or the L-BSID TLV is present. 
Associated with each R4 Paging_Announce message, the ASN Gateway starts timer TR6_Paging_Announce.

 

6

 

Once the Paging Agent (PA) at the BS receives the Paging_Announce message with the requested action set to Start, it 
extracts the relevant paging parameters for the MS (Paging Cycle, Paging Offset). It then initiates the paging action 
requested by sending out MOB-PAG_ADV message over the airlink as per the indicated paging cycle and the paging 
offset. The optional SF Flow info in the message helps the BS implement a paging priority scheme for faster call setup 
when bandwidth is constrained or for resource allocation. The PA continues to page the MS for the duration specified by 
the Paging Announce Timer TLV, until the appropriate response is received from the MS, or a stop page indication is 
received from the Local PC.

 

7

 

Upon being successfully paged the MS performs a Idle Mode Exit or a location update procedure. If any Paging Agent 
(PA) receives a successful reply from the paged MS, the Paging Agent notifies the Local PC by sending a R6 LU_Req 
message in the case of Network Initiated location update, an or R6 IM_Exit_State_Change_Req message in the case of data 
delivery to MS in idle mode. Upon receipt of a such a message the Local PC stops timer TR6_Paging_Announce if 
running, and sends the appropriate R4 LU_Req or R4 IM_Exit_State_Change_Req message to the anchor PC. Upon receipt 
of such a message, the anchor PC stops timer TR4_Paging_Announce, if running. The anchor PC also initiate stop paging 
procedures as described at step 8 and onward.

 

8

 

Upon receipt of a response from the MS as mentioned at step 7, and anchor PC wants to initiate stop paging procedure, the 
anchor PC sends a R4 Paging_Announce message to all BSs in the PG. The R4 Paging_Announce message has the Paging 
Start/Stop TLV set to 0.

 

9

 

The local PC sends a R6 Paging_Announce message to the BSs. The R6 Paging_Announce message has the Paging 
Start/Stop TLV set to 0.

 

10

 

Upon receipt of the R6 Paging_Announce message with Paging Start/Stop = 0, the BS terminate/cease a MOB_PAG-ADV 
messages over the air.

 

 
 

MS Initiated Idle Mode Entry 

This section describes the MS-initiated idle mode entry procedure for a WiMAX subscriber. 

The following figure and table provides a high-level view of the steps involved in MS-initiated idle mode entry call flow 
of an SS/MS. 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

C&H Technologies EM405-8 Manual preview
EM405-8
Brand: C&H Technologies Pages: 46
Raidon InTANK iR2775-S3 User Manual preview
InTANK iR2775-S3
Brand: Raidon Pages: 21
Raidon GT8670-TB3 Quick Setup Manual preview
GT8670-TB3
Brand: Raidon Pages: 2
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
Quantum StorNext QD7000 Manual preview
StorNext QD7000
Brand: Quantum Pages: 29
IBM eServer 130 xSeries User Reference Manual preview
eServer 130 xSeries
Brand: IBM Pages: 156
Citrix NetScaler MPX 25100 40G Quick Start Manual preview
NetScaler MPX 25100 40G
Brand: Citrix Pages: 15
Ubiquiti EdgeRouter PRO Quick Start Manual preview
EdgeRouter PRO
Brand: Ubiquiti Pages: 20
TYAN FT77B-B7059 Service Engineer'S Manual preview
FT77B-B7059
Brand: TYAN Pages: 170
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
WAGO 852-1411 Operating And Assembly Instructions preview
852-1411
Brand: WAGO Pages: 2
Hama Rotate FlashPen Operating Instruction preview
Rotate FlashPen
Brand: Hama Pages: 4
IBM TS7650 PROTECTIER DEDUPLICATION APPLIANCE Installation Roadmap Manual preview
TS7650 PROTECTIER DEDUPLICATION APPLIANCE
Brand: IBM Pages: 218
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
JetStor JX JBOD Series Quick Installation Manual preview
JX JBOD Series
Brand: JetStor Pages: 4
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
H3C WT2024-U-PWR Compliance And Safety Manual preview
WT2024-U-PWR
Brand: H3C Pages: 51
NETGEAR DG834GUV5 User Manual preview
DG834GUV5
Brand: NETGEAR Pages: 120

Brands by name

Popular brands

Load more brands