manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  GGSN Support in GPRS/UMTS Wireless Data Services 

Features and Functionality - Optional Enhanced Feature Software  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

 

3GPP TS 33.108 V9.0.0 (2009-09): 3rd Generation Partnership Project; Technical Specification Group Services 

and System Aspects; 3G security; Handover interface for Lawful Interception (LI) (Release 9) 

 

Technical Directive: Requirements for implementing statutory telecommunications interception measures (TR 

TKÜ), Version 4.0 

LEAs provide one or more TSPs with court orders or warrants requesting the monitoring of a particular target. The 
target is identified by information such as their mobile station Integrated Services Digital Network (MSISDN) number, 
or their International Mobile Subscriber Identification (IMSI) number. 

Once the target has been identified, the system, functioning as either a GGSN or HA, serves as an Access Function (AF) 
and performs monitoring for both new PDP contexts or PDP contexts that are already in progress. While monitoring, the 
system intercepts and duplicates Content of Communication (CC) and/or Intercept Related Information (IRI) and 
forwards it to a Delivery Function (DF) over an extensible, proprietary interface. Note that when a target establishes 
multiple, simultaneous PDP contexts, the system intercepts CC and IRI for each of them. The DF, in turn, delivers the 
intercepted content to one or more Collection Functions (CFs). 

Lawful intercept supports TCP transport on node interfaces along with support for IPv6 address link between chassis 
and LI server. 

On ASR 5000 or higher platforms with StarOS version 9.0 or later, this feature enhanced to allow 20,000 LI targets to 
be provisioned as well as monitored. 

Caution:

 

 

This capacity improvement impacts performance over various network scenario and in order to reach 

the full target of 20000 LI targets, it is required that the used platform have at least 12 active packet processing cards 
installed. 

Important:

 

 

For more information on this feature support, refer 

Lawful Intercept Configuration Guide

. 

 

Mobile IP Home and Foreign Agents 

Consolidation of GGSN, HA and/or FA services on the same platform eliminates CapEx and OpEx requirements for 
separate network elements and devices under management. Service integration also enables seamless mobility and inter-
technology roaming between 1xEV-DO and UMTS/W-CDMA/GPRS/EDGE radio access networks. This shared 
configuration also enables common address pools to be applied across all service types. In addition, this combination of 
collapsed services does not create dependencies for Mobile IP client software on the user access device and 
consequently does not introduce additional requirements for Mobile IP signaling in the 3GPP radio access network. 

This functionality provides the following benefits: 

 

 

Timely release of Mobile IP resources at the FA and/or HA 

 

Accurate accounting 

 

Timely notification to mobile node of change in service 

The system is capable of supporting both GGSN and Mobile IP functions on a single chassis. For Mobile IP 
applications, the system can be configured to provide the function of a Gateway GPRS Support Node/Foreign Agent 
(GGSNSN/FA) and/or a Home Agent (HA). 

HA and FA components are defined by RFC 2002 in support of Mobile IP. Mobile IP provides a network-layer solution 
that allows Mobile Nodes (MNs, i.e. mobile phones, wireless PDAs, and other mobile devices) to receive routed IP 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

R/Evolution 2000 Series Getting Started Manual preview
2000 Series
Brand: R/Evolution Pages: 58
Supermicro SuperServer E100-8Q User Manual preview
SuperServer E100-8Q
Brand: Supermicro Pages: 48
IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Brand: IBM Pages: 36
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
D-Link DIR-853/EE Quick Installation Manual preview
DIR-853/EE
Brand: D-Link Pages: 83
Winext GW5000A Manual preview
GW5000A
Brand: Winext Pages: 37
SentrySafe H0100 Manual preview
H0100
Brand: SentrySafe Pages: 2
US Robotics USR8700 Quick Installation Manual preview
USR8700
Brand: US Robotics Pages: 36
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Brand: NETGEAR Pages: 84
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
Acard ARS-2018 User Manual preview
ARS-2018
Brand: Acard Pages: 54
Kingston Technology DTR30G2 Specifications preview
DTR30G2
Brand: Kingston Technology Pages: 2
Sun Microsystems Sun Fire V20z Replacing preview
Sun Fire V20z
Brand: Sun Microsystems Pages: 4
UNICOM DynaGST/2402G GEP-33224T-1 User Manual preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 17
Seagate EXOS ENTERPRISE ST10000NM001G Product Manual preview
EXOS ENTERPRISE ST10000NM001G
Brand: Seagate Pages: 56
IBM BladeCenter HS20 Type 8843 Installation And User Manual preview
BladeCenter HS20 Type 8843
Brand: IBM Pages: 112

Brands by name

Popular brands

Load more brands