manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

HRPD Serving Gateway Overview   

▀  Features and Functionality - Base Software 

 

▄  Cisco ASR 5000 Series Product Overview

 

OL-22938-02   

The system can be configured to collect bulk statistics (performance data) and send them to a collection server (called a 
receiver). Bulk statistics are statistics that are collected in a group. The individual statistics are grouped by schema. 
Following is a partial list of supported schemas: 

 

System

: Provides system-level statistics 

 

Card

: Provides card-level statistics 

 

Port

: Provides port-level statistics 

 

Context

: Provides context-level statistics 

 

IP Pool

: Provides IP pool statistics 

 

MAG

: Provides Mobile Access Gateway statistics 

 

ECS

: Provides Enhanced Charging Service statistics 

 

RADIUS

: Provides AAA RADIUS statistics 

The system supports the configuration of up to 4 sets (primary/secondary) of receivers. Each set can be configured with 
to collect specific sets of statistics from the various schemas. Statistics can be pulled manually from the chassis or sent 
at configured intervals. The bulk statistics are stored on the receiver(s) in files. 

The format of the bulk statistic data files can be configured by the user. Users can specify the format of the file name, 
file headers, and/or footers to include information such as the date, chassis host name, chassis uptime, the IP address of 
the system generating the statistics (available for only for headers and footers), and/or the time that the file was 
generated. 

When the Web Element Manager is used as the receiver, it is capable of further processing the statistics data through 
XML parsing, archiving, and graphing. 

The Bulk Statistics Server component of the Web Element Manager parses collected statistics and stores the information 
in the PostgreSQL database. If XML file generation and transfer is required, this element generates the XML output and 
can send it to a Northbound NMS or an alternate bulk statistics server for further processing. 

Additionally, if archiving of the collected statistics is desired, the Bulk Statistics server writes the files to an alternative 
directory on the server. A specific directory can be configured by the administrative user or the default directory can be 
used. Regardless, the directory can be on a local file system or on an NFS-mounted file system on the Web Element 
Manager server. 

Important:

 

 

For more information on bulk statistic configuration, refer to the Configuring and Maintaining Bulk 

Statistics chapter in the System Administration Guide. 

 

Threshold Crossing Alerts (TCA) Support 

Thresholding on the system is used to monitor the system for conditions that could potentially cause errors or outage. 
Typically, these conditions are temporary (i.e high CPU utilization, or packet collisions on a network) and are quickly 
resolved. However, continuous or large numbers of these error conditions within a specific time interval may be 
indicative of larger, more severe issues. The purpose of thresholding is to help identify potentially severe conditions so 
that immediate action can be taken to minimize and/or avoid system downtime. 

The system supports Threshold Crossing Alerts for certain key resources such as CPU, memory, IP pool addresses, etc. 
With this capability, the operator can configure threshold on these resources whereby, should the resource depletion 
cross the configured threshold, a SNMP Trap would be sent. 

The following thresholding models are supported by the system: 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Brand: Paradyne Pages: 32
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Brand: Paradyne Pages: 28
National Instruments 8260 User Manual preview
8260
Brand: National Instruments Pages: 5
H3C CR16000-M Installation Manual preview
CR16000-M
Brand: H3C Pages: 116
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Brand: Grasslin Pages: 2
Iomega JAZ TRAVELLER Installation Manual preview
JAZ TRAVELLER
Brand: Iomega Pages: 2
process-informatik CONNECT Series Operation Quick Start Manual preview
CONNECT Series
Brand: process-informatik Pages: 8
Accton Technology Fast SwitchHub-8mi SNMP Advanced Reference Manual preview
Fast SwitchHub-8mi SNMP
Brand: Accton Technology Pages: 13
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
R&S SpycerBox Cell Hardware Manual preview
SpycerBox Cell
Brand: R&S Pages: 78
Western Digital SiliconEdge Blue Series Brochure & Specs preview
SiliconEdge Blue Series
Brand: Western Digital Pages: 2
Harmonic MediaStore 7200 Quick Reference Manual preview
MediaStore 7200
Brand: Harmonic Pages: 2
W&T Com-Server++ Manual preview
Com-Server++
Brand: W&T Pages: 228
MCE Technologies Xcaret Pro-99 Installation Manual preview
Xcaret Pro-99
Brand: MCE Technologies Pages: 9
Obvius, LLC AcquiLite A7810-0 Installation And Operation Manual preview
AcquiLite A7810-0
Brand: Obvius, LLC Pages: 29
disguise rx Hardware Manual preview
rx
Brand: disguise Pages: 12
MC Technologies MC-MRE User Manual preview
MC-MRE
Brand: MC Technologies Pages: 46
Samsung SN-324 User Manual preview
SN-324
Brand: Samsung Pages: 5

Brands by name

Popular brands

Load more brands