manualshive.com logo in svg

Cisco ASR 5000 Series, Product Overview

The Cisco ASR 5000 Series is a cutting-edge networking solution for enhanced connectivity. Ensure smooth installation and management of this product by downloading the comprehensive "Installation And Administration Manual" for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions and crucial insights for optimal utilization of the ASR 5000 Series.

Share
Download
background image

  PDG/TTG Overview 

Features and Functionality  ▀   

Cisco ASR 5000 Series Product Overview  ▄  

 

  OL-22938-02 

Multiple Digital Certificate Selection Based on APN 

Selecting digital certificates based on Access Point Name (APN) allows you to apply digital certificates per the 
requirements of each APN and associated packet data network. A digital certificate is an electronic credit card that 
establishes a subscriber‘s credentials when doing business or other transactions on the Internet. Some digital certificates 
conform to ITU-T standard X.509 for a Public Key Infrastructure (PKI) and Privilege Management Infrastructure 
(PMI). X.509 specifies standard formats for public key certificates, certificate revocation lists, attribute certificates, and 
a certification path validation algorithm. 

During session establishment, the PDG/TTG can select a digital certificate from multiple certificates based on the APN. 
The selected certificate is associated with the APN that the WLAN UE includes in the IDr payload of the first 
IKE_AUTH_REQ message. 

When configuring APN-based certificate selection, ensure that the certificate names match the associated APNs exactly. 
The PDG/TTG can then examine each APN received in the IDr payload and select the correct certificate. 

The PDG/TTG generates an SNMP notification when the certificate is within 30 days of expiration and approximately 
once a day until a new certificate is provided. Operators need to generate a new certificate and then configure the new 
certificate using the system‘s CLI. The certificate is then used for all new sessions. 

 

Subscriber Traffic Policing for IPSec Access 

Traffic policing allows you to manage bandwidth usage on the network and limit bandwidth allowances to subscribers. 

Traffic policing enables the configuration and enforcement of bandwidth limitations on individual subscribers of a 
particular traffic class in a 3GPP service. Bandwidth enforcement is configured and enforced independently in the 
downlink and uplink directions. 

When configured in the Subscriber Configuration Mode of the system‘s CLI, the PDG/TTG performs traffic policing. 
However, if the GGSN changes the QoS via an Update PDP Context Request, the PDG/TTG uses the QoS values from 
the GGSN. 

Per RFC 2698, a Token Bucket Algorithm is used to implement the traffic policing feature on the PDG/TTG. The 
following criteria is used when determining how to mark a packet: 

 

Committed Data Rate (CDR):

 The guaranteed rate (in bits per second) at which packets can be 

transmitted/received for the subscriber during the sampling interval. Note that the committed (or guaranteed) 
data rate does not apply to the Interactive and Background traffic classes. 

 

Peak Data Rate (PDR):

 The maximum rate (in bits per second) that subscriber packets can be 

transmitted/received for the subscriber during the sampling interval. 

Using negotiated QoS data rates, the system calculates the burst size, which is the maximum number of bytes that can 
be transmitted/received for the subscriber during the sampling interval for both committed and peak rate conditions. The 
committed burst size (CBS) and peak burst size (PBS) for each subscriber depends on the guaranteed bit rate (GBR) and 
maximum bit rate (MBR) respectively. This represents the maximum number of tokens that can be placed in the 
subscriber‘s ―bucket‖. The burst size is the bucket size used by the Token Bucket Algorithm. 

Tokens are removed from the subscriber‘s bucket based on the size of the packets being transmitted/received. Every 
time a packet arrives, the system determines how many tokens need to be added (returned) to a subscriber‘s CBS (and 
PBS) bucket. This value is derived by computing the product of the time difference between incoming packets and the 
CDR (or PDR). The computed value is then added to the tokens remaining in the subscriber‘s CBS (or PBS) bucket. 
The total number of tokens can not be greater than the burst size. If the total number of tokens is greater than the burst 
size, the number is set to equal the burst size. 

Summary of Contents for ASR 5000 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 5000 Series

IBM 2210 Installation And Initial Configuration Manual preview
2210
Brand: IBM Pages: 72
iDirect Evolution X3 Installation And Safety Manual preview
Evolution X3
Brand: iDirect Pages: 60
Wanroy WY51100 User Manual preview
WY51100
Brand: Wanroy Pages: 24
Western Digital WDBAAE3200ASL - My Passport Studio Specifications preview
WDBAAE3200ASL - My Passport Studio
Brand: Western Digital Pages: 2
Elementia Materials Plycem Eureka Tank Installation Manual preview
Plycem Eureka Tank
Brand: Elementia Materials Pages: 6
IBM x3800 - System - 8865 User Manual preview
x3800 - System - 8865
Brand: IBM Pages: 104
Watchguard XTM 850 Hardware Manual preview
XTM 850
Brand: Watchguard Pages: 30
Seagate Barracuda 7200.7 ST3120025A Product Manual preview
Barracuda 7200.7 ST3120025A
Brand: Seagate Pages: 58
Kaser MiniDrive Quick Start Manual preview
MiniDrive
Brand: Kaser Pages: 3
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
Cowfish Technologies VanConnect User Manual And Installation Manual preview
VanConnect
Brand: Cowfish Technologies Pages: 38
B&B Electronics EIP308 Product Information preview
EIP308
Brand: B&B Electronics Pages: 2
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
ClosetMaid ShelfTrack Installation Tips Manual preview
ShelfTrack
Brand: ClosetMaid Pages: 11
Badger Basket 09071 Assembly Instructions Manual preview
09071
Brand: Badger Basket Pages: 6
Sans Digital Mobileraid MR8X Detailed User'S Manual preview
Mobileraid MR8X
Brand: Sans Digital Pages: 81
kioxia EXCERIA G2 Quick Start Manual preview
EXCERIA G2
Brand: kioxia Pages: 24
Orico MSG-U3 User Manual preview
MSG-U3
Brand: Orico Pages: 27

Brands by name

Popular brands

Load more brands