Table 50: SMC Run/Fail LED States
Troubleshooting
Description
Color
None needed.
Card powered with no
errors detected
Green
This is normal operation during boot-up.
Card is initializing and/or
loading software
Blinking
Green
Errors were detected during the POSTs. It is likely that the errors
were logged to the system's command line interface during boot.
Refer to the
System Administration Guide
for troubleshooting
information.
Card powered with
error(s) detected
Red
Verify that the POWER LEDs on the PFUs are green. If they are
not, refer to
Checking the LED on the PFU, on page 137
for
troubleshooting information.
Card is not receiving
power
None
Verify that the power source is supplying ample voltage and
current to the chassis.
Verify that the card is properly installed per the instructions in
this document.
If all of the above suggestions have been verified, it is possible
that the SMC is not functional. Please contact your service
representative.
SMC Active LED States
The Active LED on the SMC indicates that the software is loaded on the card and it is ready for operation.
For the SMC installed in slot 8, this LED is illuminated green during normal operation. For the SMC installed
in slot 9, this LED is off during normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the
troubleshooting information in the table to diagnose the problem.
Table 51: SMC Active LED States
Troubleshooting
Description
Color
None needed for the SMC in slot 8. If green for the SMC in slot
9, verify that the SMC in slot 8 is installed properly according to
the instructions in this document.
Card is active
Green
ASR 5000 Installation Guide
141
Applying Power and Verifying the Installation
Checking the LEDs on the SMC(s)
Summary of Contents for ASR 5000
