If the card just removed from the chassis was an SMC, proceed to
Replacing the CompactFlash on an SMC,
on page 220
.
Important
Installing the Application Card
This section describes how to install an application card.
Step 1
Slide the interlock switch on the card fully downward. Flip the ejector levers outward and away from the card's faceplate.
Step 2
Holding the card by its ejector levers, align the card with the upper and lower card guides of the appropriate chassis slot
and gently slide the card into the slot until the levers touch the chassis frame.
Take extra caution when installing packet processing cards. These cards contain heat sinks that could become
loose or damaged if they come into contact with an adjacent card while the packet processing card is being
inserted in the chassis slot.
Caution
ASR 5000 Installation Guide
217
Replacing Application Cards
Installing the Application Card
Summary of Contents for ASR 5000
