Table 102: OC-3 SM IR-1 Fiber Transmit and Receive Levels
Level
Signal
-8 dBm
Max TX:
-15 dBm
Min TX:
-8 dBm (saturation average power)
Max RX:
-28 (max.) dBm (sensitivity average power)
Min RX:
The fiber-optic SFP interface on OLC2 Optical ATM Line Cards with the multi-mode interface has one pair
of host connectors.
Table 103: Multi-Mode Fiber Transmit and Receive Levels
Level
Signal
-14 dBm
Max TX:
-19 dBm
Min TX:
-12 dBm (saturation average power)
Max RX:
-30 (max.) dBm (sensitivity average power)
Min RX:
Channelized Line Cards
Channelized Line Card (CLC2) with Single-Mode Interface
The optical SFP interface on the 4-port CLC2 with the single-mode interface has four pairs of connectors that
accept SFP transceivers.
Table 104: Single-Mode Fiber Transmit and Receive Levels
Level
Signal
-8 dBm
Max TX:
-15 dBm
Min TX:
-8 dBm (saturation average power)
Max RX:
-28 (max.) dBm (sensitivity average power)
Min RX:
ASR 5000 Installation Guide
245
Technical Specifications
Channelized Line Cards
Summary of Contents for ASR 5000
