StarOS User Account Requirements
users who are allowed administrative access to the system must have the following user account
information defined in StarOS:
•
username
•
password
•
administrative role and privileges
For instructions on defining users and administrative privileges on the system, refer to
Configuring System
Administrative Users
.
Important
Configuring AAA Services
This section provides an example of how to configure AAA services for administrative users on
the system.
When configuring AAA services for the first time, the administrative user must use
non- services to log into the StarOS. Failure to do so will result in the user being
denied access to the system.
Caution
Log in to the system using non- services.
Use the example below to configure AAA services on the system:
configure
tacacs mode
server priority priority_number ip-address srvr_ip_address
end
Note:
•
server priority priority_number
: Must be an integer from 1 to 3 (
releases prior to 18.2
) or 1 through
4 (
releases 18.2+
), that specifies the order in which this server will be tried for
authentication. 1 is the highest priority, and 3 or 4 is the lowest. The priority number corresponds to a
configured server.
•
ip-address
: Must be the IPv4 address of a valid server that will be used for authenticating
administrative users accessing this system via AAA services.
•
By default, the configuration will provide authentication, authorization, and accounting
services.
Enable on the StarOS:
configure
aaa
end
For additional information, see
Disable Authentication for Console, on page 44
.
ASR 5500 System Administration Guide, StarOS Release 21.5
42
System Settings
Configuring AAA Services
