PDN Gateway Overview
▀ How the PDN Gateway Works
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
94
Step
Description
2
A PGW trigger causes a disconnect of the PDN connection for PDNID=x and the PGW sends a Binding Revocation
Indication (BRI) message to the HSGW with the following attributes: MNID, APN, HNP.
3
The HSGW responds to the BRI message with a Binding Revocation Acknowledgement (BRA) message with the sane
attributes (MNID, APN, HNP).
4
The HSGW MAG service triggers a disconnect of the UE PDN connection for PDNID=x.
5
The HSGW sends a PPP VSNCP-Term-Req with PDNID=x to the UE.
6
The UE acknowledges the receipt of the request with a VSNCP-Term-Ack (PDNID=x).
7
The HSGW optionally sends a Router Advertisement (RA) with assigned HNP and prefix lifetime=0.
GTP PDN Gateway Call/Session Procedures in an LTE-SAE Network
The following topics and procedure flows are included:
Subscriber-initiated Attach (initial)
Subscriber-initiated Detach
Subscriber-initiated Attach (initial)
This section describes the procedure of an initial attach to the EPC network by a subscriber.
