g709 otu overhead tti
To configure the OTU Trail Trace Identifier (TTI) buffer for a DWDM controller, use the
g709 otu overhead
tti
command in DWDM configuration mode. To return to the default state, use the
no
form of this command.
g709 otu overhead tti
{
expected| sent
} {
ascii| hex
}
tti-string
no g709 otu overhead tti
{
expected| sent
} {
ascii| hex
}
tti-string
Syntax Description
Configures the expected TTI string.
expected
Configures the transmit TTI string.
sent
Indicates that the string is in ASCII format.
ascii
Indicates that the string is in hexidecimal format.
hex
The TTI string. A maximum of 64 characters is allowed.
tti-string
Command Default
No TTI string is configured
Command Modes
DWDM configuration
Command History
Modification
Release
This command was introduced.
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To display the TTI strings, use the
show controller dwdm g709
command.
Task ID
Operations
Task ID
read, write
dwdm
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
15
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
g709 otu overhead tti
