Cisco ASR 9000 Series Command Reference Manual Download

Page: 645 / 1138

Description

Field

Displays the status of the flap suppression timer, with
the following possible values:

•

Off

—

The flap suppression timer is not

configured using the

lacp switchover

suppress-flaps

command.

•

—

Amount of time allowed (in

milliseconds) for standby links to activate after
a working link fails, before putting the link in
Down state.

Flap suppression timer:

Displays whether or not the Cisco-specific TLVs for
LACP are enabled. The possible values are "Enabled"
and "Disabled".

Cisco extensions:

Displays whether non-revertive behavior for the
bundle interface is enabled or not. The possible values
are "Enabled" and "Disabled".

Non-revertive:

Displays whether or not the bundle is operating using
Multichassis Link Aggregation (MC-LAG), with the
following possible values:

•

Operational

—

All required configuration has

been committed for MC-LAG and mLACP is
in use on the bundle.

•

Not operational

—

mLACP is not working

because some mandatory configuration for
MC-LAG is missing on the bundle or on the
active members of the bundle.

•

Not configured

—

None of the mandatory

configuration for MC-LAG has been committed
on the bundle, and the mLACP sub-fields are
not displayed.

mLACP:

Number of the Interchassis Communication Protocol
group (if configured) in which the bundle participates.
Otherwise,

“

Not configured

”

is displayed.

ICCP group:

ICCP redundancy role of the local device for this
mLACP bundle, with the following possible values:

•

Active

—

Bundle is currently active locally.

•

Standby

—

Bundle is a backup locally.

Role

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

625

Link Bundling Commands on the Cisco ASR 9000 Series Router

show bundle

Summary of Contents for ASR 9000 Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ASR 9000 Series

Reviews:

Related manuals for ASR 9000 Series

Brands by name

Popular brands

Cisco ASR 9000 Series, Command Reference Manual

Search results

Summary of Contents for ASR 9000 Series

Reviews:

Related manuals for ASR 9000 Series

Brands by name

Popular brands